.png&w=256&q=75)
1 LU Bin Fit - OX Cover Locked Lite Rail - (1 MU Rail)
Rail Slim Covers can be used as aesthetic covers for Multibins or to hold Magnet Points in place.
This is an "OX" Pop-In, which represents its shape and length (Look at the images to understand).
Learn more about this part at https://multiboard.io/knowledge-hub
Printing Guidelines:
Use 3 perimeter wall thickness, 0.2 mm layer height, 15% infill, and no supports. Apart from that, use your printer's default settings.
The printing orientation is as provided in the file. Make sure the downloaded files are .STL. This part has been designed with a tolerance of 0.25 mm. Your printer will need to be able to bridge gaps of up to 30 mm for some designs.
For more information about printer settings, click here.
This object is part of Multiboard, a FREE and ridiculously modular organization system with thousands of parts, for creating the most adaptable workspace possible. Learn more and find ALL the parts at https://multiboard.io
1 LU Bin Fit - OX Cover Locked Lite Rail - (1 MU Rail)
Fix Point to Countersink Adapter
Flush - Small Hole Center Marking Tool
6.25 Offset - Small Hole Center Marking Tool
12.5 Offset - Small Hole Center Marking Tool
2x6 MU - Right Support End - Modular Bolt-Locked Shelf
4x8 MU - Center - Modular Bolt-Locked Shelf
2x2 MU - Right Support End - Modular Bolt-Locked Shelf
2x6 MU - Left Support End - Modular Bolt-Locked Shelf
8x8 MU - Center - Modular Bolt-Locked Shelf
2x4 MU - Right Support End - Modular Bolt-Locked Shelf
4x6 MU - Center - Modular Bolt-Locked Shelf
2x8 MU - Left Support End - Modular Bolt-Locked Shelf
2x2 MU - Left Support End - Modular Bolt-Locked Shelf
8x2 MU - Center - Modular Bolt-Locked Shelf
8x4 MU - Center - Modular Bolt-Locked Shelf
2x4 MU - Center - Modular Bolt-Locked Shelf
2x8 MU - Right Support End - Modular Bolt-Locked Shelf
8x6 MU - Center - Modular Bolt-Locked Shelf
2x8 MU - Center Support - Modular Bolt-Locked Shelf
Here is a fix: https://thangs.com/designer/haliphax/3d-model/%5BFIX%5D%201%20LU%20Bin%20Fit%20-%20OX%20Cover%20Locked%20Lite%20Rail-1561065
Could not for the life of me get this part to "pop in" whatsoever. Wound up using a 1 LU Bin Fit OX magnet Sliding Lite Rail instead, but it doesn't lock in place, so there's some clickiness from it jiggling around when the bin is moved. Would prefer to get this to work, but it doesn't fold and the tolerance for the shorter angled edge is not enough for it to clear no matter how hard I push; I'm afraid I'll break the bin shell.
I figured it out -- there is a mistake in the model! There are "tabs" and "bumpers" that help snap the piece into place. On every other bin "pop-in", the tabs are both on the same side, and the bumpers are both on the opposite side. On this piece, however, each side has one edge with bumpers and one edge with tabs, so you cannot get this into place without shaving off one of the two tabs with a deburring tool. I compensated for it in the STL with a quick pocket hack, but this is not ideal.
Here is a screenshot of the STL preview with the problem outlined in red. https://imgur.com/a/i2qJWeL