.png&w=3840&q=85)
.png&w=256&q=75)
.png&w=256&q=75)
.png&w=256&q=75)
.png&w=256&q=75)
.png&w=256&q=75)
Fallout Fusion Core Replica / Container / Multi-parts
Introducing the Fusion Replica Container, a remarkable piece of post-apocalyptic artistry straight from the wasteland!
Both the fusion core and the base are cleverly split in half, with each part screwing together, offering ample storage for your Nuka Cola caps or other wasteland treasures.
Crafted to print in parts, this model is ideal for single-color 3D printers, allowing you to assemble and glue it together seamlessly.
Includes the following parts:
Fusion Core:
- Bottom (Yellow)
- Bottom Pieces (Silver)
- Screws (Sliver)
- Top Piece (Red)
- Top (Black)
Base: -Bottom -Top -Tiles -Led
Factory Files: -Pre-supported base and top of fusion core
"All of my models are for personal use only, unless you are an active subscriber of Thangs with a commercial license."
3D PRINTING SETTINGS:
-Some supports needed for the base and top of the fusion core as per pictures -The tiles for the base have to be printed with a brim and slowly -2 Walls and 8% rectilinear infill, 0.16mm layer height recommended
Fallout Fusion Core Replica / Container / Multi-parts
Female Alien Wall Mounted Headset Controller Holder / No Supports
Baby Dragon Forest Guardian / No Supports / 3MF Included
Cat Hidden Middle Finger / 3MF Included
Middle Finger Cat with Surprise Crate / 3MF Included
Breakable Surprise Eggs - Dinosaur Wave 2 / No Supports / 3MF
Billy The Puppet / Horror Mini / 3MF Included
Flexi Cuttlefish / Big Eyes / No Supports
Rattan Shelf - Rectangular / No Supports
Hologram Ilusion Box / No Supports
Low Poly Vase Magnet / No Supports
Gachapon Capsule Machine / Easy Print
Modular Rectangular Display Shelves
Breakable Surprise Egg - Dinoshi / No Supports / 3MF
Bunny Head Wall Mounted / Home Decor
Tap To Pay Middle Finger Wand
Breakable Surpirse Eggs - Dinosaur Wave 1 / No Supports / 3MF
Gummy Bear Controller & Headset Holder / No Supports
.gif&w=3840&q=75)
Mr Nice Guy Easter Bunny / No Supports
Baby Dragon Teen Version / No Supports
Am I missing something, or is the base top supposed to be separated into two parts for the black/yellow?
Sorry I forgot to add to the instructions to add 2 stops on the slicer so you can swap the filament from black to yellow and from yellow to black. I hope makes sense now :)
That's what I ended up doing! I was just thinking maybe a part was missing since everything else was split, haha. Thanks!
No worries and thanks for letting me know that info was missing :) cheers!