Molly the Mammoth.

This print uses 13 unique filaments. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 233x233mm in size. The Max Depth is 5mm and the Actual Depth is 5mm.

NOTE - MY RANGE OF PICTURE FRAMES ARE AVAILABLE SEPARATELY. SEE HERE

Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA BambuLab Basic Green Transmission Distance: 2 PLA Overture Cement Gray Transmission Distance: 0.6 PLA BambuLab Basic Brown Transmission Distance: 2 PLA BambuLab Basic Orange Transmission Distance: 5 PLA+ Sunlu Grey Transmission Distance: 2 PLA Overture Matte Light Gray Transmission Distance: 0.3 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Matte Latte Brown Transmission Distance: 2 PLA+ Esun Bone White Transmission Distance: 5 PLA BambuLab Basic Jade White Transmission Distance: 5

Swap Instructions: Start with Black At layer #16 (1.44mm) swap to Charcoal Black At layer #18 (1.52mm) swap to Green At layer #20 (1.68mm) swap to Cement Gray At layer #23 (1.92mm) swap to Brown At layer #24 (2mm) swap to Orange At layer #25 (2.08mm) swap to Grey At layer #27 (2.24mm) swap to Light Gray At layer #28 (2.32mm) swap to Red At layer #29 (2.4mm) swap to Orange At layer #30 (2.48mm) swap to Yellow At layer #32 (2.64mm) swap to Latte Brown At layer #39 (3.2mm) swap to Bone White At layer #44 (3.6mm) swap to Jade White for the rest.

NOTE - Picture frame is not included in this download.