Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

Filaments Used: PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA BambuLab Basic Jade White Transmission Distance: 5.7 PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA HP3D Red Transmission Distance: 5.8 PLA HP3D Orange Transmission Distance: 8 PLA BambuLab Basic Jade White Transmission Distance: 5.7

Swap Instructions: Start with Charcoal Black At layer #14 (0.68mm) swap to Jade White At layer #32 (1.4mm) swap to Charcoal Black At layer #34 (1.48mm) swap to Red At layer #42 (1.8mm) swap to Orange At layer #43 (1.84mm) swap to Jade White for the rest.