Bubble Lattice Planter
Digging this lattice pattern lately. I have a few more I'll be releasing soon that use this same pattern, but are different shapes. So keep an eye out for those!
This planter works with the same mounts as all my other wall planters.
Two sizes are available — 2.75" and 4.5".
I've also included tabletop versions that don't have the wall mount.
Supports None needed!
Scaling I wouldn't recommend scaling this one since it perfectly fits the command strips and the screw holes are designed specifically for #10-12 x 1-1/4 in anchors and screws.
Orientation The planter and tray should have their bottoms on the build plate. All mounts should have the sliding dovetail facing up.
Print Settings .2mm layer height 15% grid infill 2 walls
Filament & Hardware
- Filament I used for this print: Overture Matte White PLA
- Command Medium Picture Hanging Strips
- Hardware: #10-12 x 1-1/4 in screws
Filament and hardware/non 3D printed items for this model can be found on my Amazon Storefront, linked here: https://linktr.ee/loftedgoods
Bubble Lattice Planter
Heywood Wall Planter v2
Square Tapered Planter
Catchall for The Horizontal Rail
Sunglasses Holder for The Horizontal Rail
Shelf for the Horizontal Rail
The Rail - Coat Hook
The Horizontal Rail
Scales Planter with Hidden Drip Tray
The Rail Tripod V2
Tripod Lamp
The Rail - Tripod Attachment
The Rail - Ira Planter
The Rail - Storage Bins
Wall Planter with Hidden Drip Tray - LG03
The Rail - Hook Attachment
The Rail - Grow Light Attachment
The Rail v2
Hanging Planter - The Gio
Bottle Opener Coasters v2
No LED light?
Just finished printing this, looks amazing, but the drip tray doesn’t snap into place. It’s quite loose actually. What might be wrong? Didn’t scale anything
I believe you must set the bridge flow speed up to 1.6 from the original 1 value. I think this causes those overhangs on the snap in place ears to be more tight. Im like 100% sure I have seen this information in one of his other planters where he used this solution, mentioned it in the print settings.. hope this helps
Any chance we could get a planter mount version for slat walls/ office cubicle slats?
When I select STL as my download type the files are never downloaded.
Hello, I am printing with a 0.6mm nozzle, and although the parts fit together, once you screw the thread in completely, it becomes impossible to unscrew it again.
Could you possibly create the thread fit with a slightly larger tolerance? Or alternatively, could you share the 3D model so we can adjust the tolerance based on our printers?
When I select STL file to download nothing happens.
I keep getting errors when I try to load this into Cura that there are pieces missing/corrupted. Any ideas? Do you use a different slicer?