Digging this lattice pattern lately. I have a few more I'll be releasing soon that use this same pattern, but are different shapes. So keep an eye out for those!
This planter works with the same mounts as all my other wall planters.
Two sizes are available — 2.75" and 4.5".
I've also included tabletop versions that don't have the wall mount.
Supports None needed!
Scaling I wouldn't recommend scaling this one since it perfectly fits the command strips and the screw holes are designed specifically for #10-12 x 1-1/4 in anchors and screws.
Orientation The planter and tray should have their bottoms on the build plate. All mounts should have the sliding dovetail facing up.
Print Settings .2mm layer height 15% grid infill 2 walls
Filament & Hardware
- Filament I used for this print: Overture Matte White PLA
- Command Medium Picture Hanging Strips
- Hardware: #10-12 x 1-1/4 in screws
Filament and hardware/non 3D printed items for this model can be found on my Amazon Storefront, linked here: https://hendricks.design/links/