.png&w=256&q=75)
8 mm, Triple Mounting Offset Snap - Multiboard - DS Part A
Quick and Dirty Triple Offset Snap for Multiboard. Searched the web and the discord and didn't find anything, so I made my own. Works well, can be used in either orientation.
Probably doesn't conform to Keep Making's guidelines, but whatever, I needed it. You might need it too.
Needed it for a weird shaped custom multiboard I made.
Printed with paint-on supports in Prusa, so the supports only go up the middle to save material.
0.2mm layer height 0.4mm nozzle Paint-on supports Printed with PLA
Edited: I realized that the original model wasn't compatible with the triple part B (https://thangs.com/designer/Keep%20Making/3d-model/Triple%20Snap%20Connector%20-%20DS%20Part%20B-974014?part=ee04fb56-f514-4c3e-ac14-e3dea6858538) so I've uploaded a mirrored version as well. Honestly no need to use the original version, use the mirrored. I just don't really know how to work version history properly in Thangs!
8 mm, Triple Mounting Offset Snap - Multiboard - DS Part A
6.25 mm, Triple Mounting Offset Snap - Multiboard - DS Part A
Raised Triple Snap (DS Part B)
Flush Snap (DS Part B) For 8 mm - Offset Snap
Raised Triple Snap (DS Part A)
8 mm, Command Strip Dual T Mounting Offset Snap - DS Part A
.png&w=3840&q=75)
12.5 mm - Offset Snap (DS Part A)
_-_Part_1.png&w=3840&q=75)
Remix of 8 mm - Quad Offset Snaps (DS Part A Single Piece)
Remix of 8 mm, Cross Quad Offset Snap - DS Part A
Multiboard Remix | 8 mm - Dual Offset Snap (DS Part A) Rivet Lock Mount
.png&w=3840&q=75)
Remix of 8 mm - Dual Offset Snaps (DS Part A) - SOLID STEP AND Fusion 360
Remix of 8 mm, T Mounting Offset Snap - DS Part A - Slatwall Adapter
Offset Snap (DS Part A) modified for use on US General tool wall.
%2520-%2520x4%2520Stack.png&w=3840&q=75)
12.5 mm - Offset Snap (DS Part A) - x4 Stack
%2520-%2520Part%25201.png&w=3840&q=75)
12.5 mm - Quad Offset Snaps (DS Part A)
.png&w=3840&q=75)
12.5 mm - Dual Offset Snaps (DS Part A)
%2520-%2520x4%2520Stack.png&w=3840&q=75)
12.5 mm - Quad Offset Snap (DS Part A) - x4 Stack
6.25 mm - Quad Offset Snap (DS Part A) - x4 Stack
15 mm - Dual Offset Snaps (DS Part A)
6.25 mm - Dual Offset Snap (DS Part A) - x4 Stack
Might you be so kind and create such a triple offset snap for the new 6.25mm offset snaps design? I will have 8m of diagonal and on the diagonal, only triple snaps will work. Thank you for your consideration.
I just made a 6.25mm version here https://thangs.com/designer/valda.valadas.strix/3d-model/6.25%20mm%2C%20Triple%20Mounting%20Offset%20Snap%20-%20Multiboard%20-%20DS%20Part%20A-1368837?source=All+Files
Would you mind making a 12.5mm version as well?
Printed really well, printed on side orientation and supports removed perfectly, looks great
Thanks for this design. Saved me having to create my own when I realised that the board extension I was implementing needed a triple offset Snap! Worked a treat and got me out of a hole :-) FYI I printed it flat to the plate (as per all the other snaps I have printed and have experienced no issues with its strength.