A mini skeleton with a removable head!
Printing
- Head prints separately
- Can be printed in both FDM and resin
- Supports ARE required on the body - especially below the pelvis and ribs. If printing body #1, supports are needed under the elbows
- Minimal infill required
All Sculptember Models
More Customization
Check out the STL Twister by Andrew Sink to put a custom twist on this model.
Can I sell copies of this?
Yes! This project was shared under the Creative Commons - Attribution license.
This license allows selling copies, but you must provide proper attribution, as detailed in the license itself.
Please note that any other projects linked here (remixes or related projects) may have a different license. Please respect those licenses.
This license applies only to the model files (STL, 3MF, STEP, F3D) included in this project. It does not apply to photos, videos, my logo, or other supplemental graphics attached to or displayed with this project.
Recommended Attribution Text
"Sculptember Mini Skeleton" (https://3dprinty.xyz/project/132) is designed by 3D Printy (https://3dprinty.xyz) and shared under a Creative Commons Attribution (CC BY 4.0) license (https://creativecommons.org/licenses/by/4.0/).