Dowel hanger v2

Hangers for 1"5/8" Wooden dowels used to hang clothing in closets or curtains and drapes. Two designs available. One with angled mounting holes and one with straight mounting holes. Strong enough to hold the dowel with the open side facing down if needed. I printed mine in PETG-CF at 0.3mm layer height. EDIT: In v2 I have added a screw in clamp that slides over your dowel so that the dowel will not move left to right if there is no natural obstruction to the movement already. Print out 2 and place 1 on each side of the hangers. i recommend predrilling your dowel and using a small countersunk screw, probably a number 6 or 8. Doesn't need to be very long.