A Gyroid with curves to hold your Switch game cartridges.  Or anything else really, just don't print the core...

ShapelyGyroid

Bottom

RotoBod

Eyes

CardCore

**PotMaker**
Just in time for Spring and #MakerMadness, a pot maker ready to turn newspaper strips into seed beds!  

Makes a pot with a 55mm (~2") base.

**Instructions**
- Rip newspaper into ~10cm/4" strips. 
- Wrap one strip around the bottom with a 3cm/~1" overhang.  
- Fold bottom under, pressing in from opposite sides.  
- Press Pestle into base, forming the bottom of the pot. 

Pot Maker 

Pestle

Base

There's already a mess of infinity cubes out there but I needed an excuse to mess about with print in place hinges and bridging.   Hence my humble offering.  

I totally borrowed the design from **mjdargen** over on [instructables](https://www.instructables.com/Infinity-Cube-in-Fusion-360/).  The tutorial is pretty easy, though I didn't follow it too closely.  I think a tinkercad version would be pretty easy too as the shapes aren't complex.   

For added excitement,  I took out the insides because I liked the structure that resulted.  *Caution: When I sliced this model with PrusaSlicer half of the bridges were done in the wrong direction and a little messy as a result.  SuperSlicer doesn't have this problem.*

** Heads up: ** You need to add supports for the upper floating hinges (on the top surface).

I've included both the Fusion360 file and a STEP version in case you want to modify things.  

All are designed with a 0.2mm layer height for clearance.  If you want to change this, you have to modify the clearance parameter in the CAD file.

Bridges of Cubison County

Cube

Holey Cube

Cube 20mm.3mf

Holey Cube 50mm.3mf

Cube 50mm.3mf

Holey Cube 30mm.3mf

Holey Cube 20mm.3mf

Cube 30mm.3mf

A complete conversion of a Pelican 1200 hard case to contain a DJI Mini2 and all of the associated bits and bobs.  There are boxes that can be printed to hold small parts like props that need to be kept separate.

Pelican 1200 Conversion for DJI Mini2

DJI-MINI2-iNSERT v21.step

Exported STL from PrusaSlicer to show body with the collar in position and ready to print.

bent_stand_watch_stand_collar_and_body.stl

Yet another Apple Watch Stand.  Designed to hold the watch in Landscape mode, just above the nightstand (so you can see it over the other stuff....).  The base is wide and stable, and due to the design, allows routing the cord in any direction.

When printing, make sure to print the collar and the body together as they can't be combined afterwards.  The collar should be centred around the body (see the image on the build plate with supports for a better idea of what I'm talking about).

Holds the Apple charger in place.  No supports required.  Print orientation should be top up.

bent_stand_watch_stand v13_screw_cap_1_Body1.3mf

Secures body to the  base, print with the body.

Holder for the Apple inductive charger.  Requires supports for the head.  Must  be printed with the collar in place.  

bent_stand_watch_stand v13_Body1.3mf

bent_stand_watch_stand v13_colllar_1_Body1.3mf

Base for apple watch stand -- no supports required.

bent_stand_watch_stand v13_Base_1_Body1.3mf

A simple bracket for hanging quilts on a wall.  Use a wooden dowel to support the quilt between two (or more for larger quilts) brackets

Quilt Hanger

Left quilt hanger (small)

quilt hook v8_quilt hook v8_hook_left_small_1_Body1.3mf

quilt hook v8_quilt hook v8_hook_right_small_1_Body1.3mf

quilt hook v8_quilt hook v8_hook_right_1_Body1.3mf

quilt hook v8_quilt hook v8_hook_left_1_Body1.3mf

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

idlebear