Modeled the Rammstein Flügel logo onto a plaque with the phrase "Gott weiß ich will kein Engel sein" on it.  Looks killer with the backer in black and the rest in yellow.

DISCLAIMER: This is strictly fan art - I do not claim to own the rights to the logo itself.  The rights to that logo belong to Rammstein and/or their management.

Rammstein Flügel Engel Plaque

Reuploaded - accidentally deleted the original files trying to clean up some parts I uploaded

I wanted to try my hand at printing the new Zeit logo for Rammstein's upcoming album. Two models were made - one with a solid background (Rammstein_Zeit_with_background.stl) and one where the background behind the letters and logo are hollow (to allow light through if using a clear filament). To print multiple colors, stop your print at layer 6 or 7 (depending on your slicer) and swap filaments.

DISCLAIMER: All rights to the Zeit logo belong to Rammstein and Rammstein management. This is a fan-made model and is in no way official or affiliated with Rammstein, the album Zeit, or any related properties.

Rammstein Zeit (Solid Back)

Rammstein_Zeit_with_Background.stl

Reuploading - accidentally deleted the file when cleaning up related parts.

I wanted to try my hand at printing the new Zeit logo for Rammstein's upcoming album. Two models were made - one with a solid background (Rammstein_Zeit_with_background.stl) and one where the background behind the letters and logo are hollow (to allow light through if using a clear filament). To print multiple colors, stop your print at layer 6 or 7 (depending on your slicer) and swap filaments.

DISCLAIMER: All rights to the Zeit logo belong to Rammstein and Rammstein management. This is a fan-made model and is in no way official or affiliated with Rammstein, the album Zeit, or any related properties.

Rammstein Zeit (Thinner Back)

Rammstein_Zeit_thinner_back.stl

Trying to print something using multiple filaments with a single extruder? Can't quite dial in your settings and some prints didn't turn out how you wanted? I've been there and wanted to find a better way to help me get my technique down - enter the Single-Extruder Multicolor Test model.

This is a tiered 30mm long x 45mm wide by 45mm tall model to let you try printing up to 3 different colors using whatever plugins/techniques you're interested in (me personally, I found Octopi's Multicolor plugin to work very well) without ruining a model you care about.

Note: the physical pictures shown are of the protoype which was 15mm x 45mm x 15mm. I didn't like how small it came out so I upped the width and height to print out the words a little clearer. And for some reason the yellow filament plugged up on 1st layer of the change.

Single-Extruder Multicolor Test

This is a holder for a strip of NeoPixel LEDs.  Remixed from ["Anycubic i3 Mega Lightning with Neopixel-Strip and NodeMCU"](https://www.myminifactory.com/object/3d-print-anycubic-i3-mega-lightning-with-neopixel-strip-and-nodemcu-74176).  I shrunk the body down a bit width-wise, removed the middle lip, and added slots for the Leg parts.  Legs are designed to clip on the frame of the printer, like the original model, then fit into the square slots to hold the body in place

NeoPixel Mega S (Body)

This is a holder for a strip of NeoPixel LEDs.  Remixed from ["Anycubic i3 Mega Lightning with Neopixel-Strip and NodeMCU"](https://www.myminifactory.com/object/3d-print-anycubic-i3-mega-lightning-with-neopixel-strip-and-nodemcu-74176).  I shrunk the body down a bit width-wise, removed the middle lip, and added slotss for the Leg parts.  Legs are designed to clip on the frame of the printer, like the original model, then fit into the slots to hold the body in place

Anycubic_Neopixel_body.stl

This is a holder for a strip of NeoPixel LEDs.  Remixed from ["Anycubic i3 Mega Lightning with Neopixel-Strip and NodeMCU"](https://www.myminifactory.com/object/3d-print-anycubic-i3-mega-lightning-with-neopixel-strip-and-nodemcu-74176).  I shrunk the body down a bit width-wise, removed the middle lip, and added slots for the Leg parts.  Legs are designed to clip on the frame of the printer, like the original model, then fit into the square slots to hold the body in place

Legs to clip the Neopixel holder body to the frame. Print two of these if printing the body and legs separate

NeoPixel Mega S (Legs)

Legs to clip the Neopixel holder body to the frame. 

Anycubic_Neopixel_Holder_legs.stl

This is a holder for a strip of NeoPixel LEDs.  Remixed from ["Anycubic i3 Mega Lightning with Neopixel-Strip and NodeMCU"](https://www.myminifactory.com/object/3d-print-anycubic-i3-mega-lightning-with-neopixel-strip-and-nodemcu-74176).  I shrunk the body down a bit width-wise, removed the middle lip, and added slots for the Leg parts.  Legs are designed to clip on the frame of the printer, like the original model, then fit into the square slots to hold the body in place

Full print of the body and legs

NeoPixel Mega S (Body + Legs)

Anycubic_Neopixel_Holder_body_and_arms.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like