BambuLabs Adapter for Tek_3D  Spool Holder

All Credit to Tek_3D for creating this excellent Spool Holder (The Purple Parts) for the Creality Printers (Ender 3 and What Not).   https://www.thingiverse.com/thing:4881187  

I have the AMS for my BambuLabs X1C, and the Single Spool Holder it comes with leaves a lot to be desired especially if you have a need to swap to irregularly sized filament roles regularly.  This not only allows for the AMS to remain connected all of the time, but provides a locking mechanism just about any roll of filament.    It also makes for the smoothest Rolling Filament Holder I've ever used.  

Printed at .2mm.  Have the Bambu Labs auto allign to print with no supports.  

Avatar RPG Combat Deck Box (Sleeved)

Avatar_Card_Box_Bottom_v2.stl

Nut Hunt 3D Organizer 

Objective_Dice_Table_v3.stl

Unexploded Cows Organizer

Unexploded Cows Insert/Organizer 

Note: For some reason all of my designs import into the Slicer sideways. Make sure to Print with the Bottom down.  No Supports should be necessary.

Print the following for Organization:

1x Unexploded_Cow_Organizer_v1
I designed this to be storable both flat on the bottom and sideways in a Kallax.

Noted Instructions:

It was Printed at .2 Layer Height.
20% Infill
5 Floors/Tops
3 Walls

The Resistance Organizer

The_Resistance_Box_1.stl

The Hunger Divider

This is a divided for the Hunger Board Game Tiles.  Makes setup a bit easier.

Note: For some reason all of my designs import into the Slicer sideways. Make sure to Print with the Bottom down.  No Supports should be necessary.

Noted Instructions:

It was Printed at .2 Layer Height.
25% Infill

The_Hunger_Divider.stl

Sea of Clouds Organizer

Sea of Clouds Insert/Organizer Including All Current Expansions and Promos

Note: For some reason all of my designs import into the Slicer sideways. Make sure to Print with the Bottom down.  No Supports should be necessary.

Print the following for Organization:

1x Sea_of_Clouds_Organizer
NOTE: The GCode uploaded is an improvement over the Design Picture for how to use.  New Pictures to come once the new file has been printed.
I designed this to be storable both flat on the bottom and sideways in a Kallax.

Noted Instructions:

It was Printed at .2 Layer Height.
20% Infill

King of Tokyo Dark Penguin Foot

This design take a bit of trial and error to get the fit you want.  Might even require a bit of re-sizing.  

3D Print the the Foot Piece.

For the actual decal, I printed that on printable sticky vinyl with a laserjet printer (NOTE: The paper I used said inkjet only but ran through the laserjet just fine with really good color quality).  

Homebrewers Organizer

Player_Tokens_v7.stl

Celestia_Organizer_v1.stl

Celestia Insert/Organizer Including All Current Expansions

Note: For some reason all of my designs import into the Slicer sideways. Make sure to Print with the Bottom down.  No Supports should be necessary.

Print the following for Organization:

1x Celestia_Organizer_v1
I designed this to be storable both flat on the bottom and sideways in a Kallax.

Noted Instructions:

It was Printed at .2 Layer Height.
20% Infill

Onitama Organizer

Onitama_Player_v4.stl

HereToSlayTest.stl

Here to Slay Insert/Organizer Including All Current Expansions

Note: For some reason all of my designs import into the Slicer sideways. Make sure to Print with the Bottom down.  No Supports should be necessary.

Print the following for Organization:
 - 1x Here to Slay Organizer

I designed this to be storable both flat on the bottom and sideways in a Kallax.      

Noted Instructions:
 
 - It was Printed at .2 Layer Height.
 - 15-25% Infill

Kenjin_Organizer.stl

Kenjin Insert/Organizer Including Battlefield Promo

Note: For some reason all of my designs import into the Slicer sideways. Make sure to Print with the Bottom down.  No Supports should be necessary.

Print the following for Organization:
 - 1x Kenjin Organizer

I designed this to be storable both flat on the bottom and sideways in a Kallax.      

Noted Instructions:
 
 - It was Printed at .2 Layer Height.
 - 15-25% Infill

Dead Men Tell No Tales Organizer

Tile_Box_v2.stl

Nueroshima Hex 3.0 Organizer

Steel Police with Tokens.stl

Some of my Newer/Older Stuff is at the following:

https://www.printables.com/@TylerVelvin_954102/models

https://www.thingiverse.com/velvinator/designs

https://makerworld.com/en/u/2544372478



velvinator

Achievements

Seedling

Debutant

Explorer

BambuLabs Adapter for Tek_3D Spool Holder