Tim H

MagIcon Dishwasher Sign

by
tim.m.hoefer
Follow
Follow
Remix Model
tim.m.hoefer
tim.m.hoefer
|
Image 8 of 16
MagIcon Dishwasher Sign 3d model
tim.m.hoefer
tim.m.hoefer
|
Image 8 of 16
MagIcon Dishwasher Sign 3d model
2D
3D
Makes
MagIcon Dishwasher Sign 3d model
MagIcon Dishwasher Sign 3d model
MagIcon Dishwasher Sign 3d model
MagIcon Dishwasher Sign 3d model
MagIcon Dishwasher Sign 3d model
MagIcon Dishwasher Sign 3d model
MagIcon Dishwasher Sign 3d model
MagIcon Dishwasher Sign 3d model
MagIcon Dishwasher Sign 3d model
MagIcon Dishwasher Sign 3d model
MagIcon Dishwasher Sign 3d model
MagIcon Dishwasher Sign 3d model
MagIcon Dishwasher Sign 3d model
MagIcon Dishwasher Sign 3d model
MagIcon Dishwasher Sign 3d model
MagIcon Dishwasher Sign 3d model
This model is restricted by licensing terms. 

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5026758.


###INTRO

I've printed a few clean/dirty dishwasher signs. After a bit of use (there are many on TVerse...and they are SUPER handy, especially with kids), I started thinking about using a magnet to quantize the sign switching between clean and dirty. I also thought about the fact that there are likely languages where the words for "clean" and "dirty" don't necessarily have the same number of letters and how the use of icons/pictures could make the sign a bit more universal.

From these thoughts and a little brainstorming was birthed the Magnetic Icon Dishwasher Sign. This thing feels sturdy and the action on the slider is crisp and quick. I hope others enjoy the utility of this as much as I enjoyed designing it.


###PARTS

###PRINTED

  1. Top
  2. Slider (choose one) - takes 2 button neo mags....there are multiple slider "flavors" + blank
  • ThumbsUp/SteamingPoo
  • O/X
  • ThumbsUp/ThumbsDown
  • In/Out
  1. Bottom - takes 1 button neo mag
  2. Angled Base (choose one) - comes in 2 flavors....bar neo magnet and quad button neo magnet
  • Quad neo mag base
  • Bar neo mag base

###HARDWARE: Top/Bottom/Slider

  1. 4 - M4x8mm bolts (assortment)
  2. 3 - 10x3mm button magnets

###HARDWARE: Angled Base (choose one) ##Button Mag Base

  1. 4 - 10x3mm neo button magnets same as above

##Bar Mag Base

  1. 1 - 60x10x3mm neo bar magnet

###MISC:

  1. CA/Super glue

###PRINTING

##Top

  • Printed top-face down but it could be printed inverted with supports for a cleaner top look

##Slider

  • Print with icon facing up/ track grooves facing down
  • Supports added to mag button slots

##Bottom

  • Printed with back facing bed
  • Supports added to the mag button slot and the two base slots

##Angled Base

  • Printed with legs on the bed and supports on the lower edge of the angled back

###ASSEMBLY
  1. SLIDER: Affix two button mags into back of chose slider (CA glue)
  2. BOTTOM: Affix one button mag into back of bottom (CA glue)
  3. ANGLED BASE:
  • Quad Button Mag Base: Affix four button mags into base (CA glue)
  • Bar Mag Base: Affix bar mag into base (CA glue)
  1. Place Slider into grooves of bottom
  2. Enclose top over slider onto bottom
  3. Turn over and place angled base legs into base leg slots of back (ensure the back is angling towards the top of the assembly)
  4. Attach everything with the 4 M4x8mm bolts (Squeeze the Top and Bottom assembly together while you twist in the bolts...you may find it necessary to twist into and out of the assembly slightly as you go as it's meant to be a tight fit)

###IN-ACTION

YouTube


0 Likes1 DownloadsMay 26, 2023


0 Likes1 DownloadsMay 26, 2023
This model is restricted by licensing terms.