This is a Filter cell to hold Baader Solar Safety Film which fits on the front of the Skywatcher 190MN Telescope

Skywatcher 190MN Solar Safety Film Filter Cell

Skywatcher 190MN Solar Safety Film Filter Cell - Part 1.stl

This is a 2x1 **gridfinity** parts bin for **storing drill bits.**

I designed it for my small collection of masonry bits with a few spare places for expanding in the future.


**D.I.Y. TINKERER**
[https://www.youtube.com/c/diytinkerer](https://www.youtube.com/c/diytinkerer) - please visit my channel if you like this print :-) Thanks!

Gridfinity concept by [Zack Freedman](https://www.youtube.com/c/zackfreedman) 

Gridfinity 2x1 Vertical Drill Bit Holder(1).stl

This is a **gridfinity** compatible 1x1 storage bin for storing misc. drill bits, I use it to store my counter-sink bit and ceramic tile bits.

**D.I.Y. TINKERER **- please visit my channel if you like this model 
[https://www.youtube.com/c/diytinkerer ](https://www.youtube.com/c/diytinkerer )

Gridfinity concept by [Zack Freedman](https://www.youtube.com/c/zackfreedman )

Gridfinity 1x1 Ceramic Bit Holder.stl

This is a gridfinity compatible 3x1 holder for 11 spade bits. The bits are stored with a slight backward angle to them so they display better.

D.I.Y. TINKERER
[https://www.youtube.com/c/diytinkerer](https://www.youtube.com/c/diytinkerer)
Gridfinity concept and original designs by [Zack Freedman](https://www.youtube.com/c/zackfreedman)

Gridfinity 3x1 Spade Bit HolderV2.stl

This is a gridfinity compatible 3x1 holder for 11 spade bits.

D.I.Y. TINKERER
[https://www.youtube.com/c/diytinkerer](https://www.youtube.com/c/diytinkerer)
Gridfinity concept and original designs by [Zack Freedman](https://www.youtube.com/c/zackfreedman)

This is a wall mount for the gridfinity small parts storage system by** Zack Freedman **

This one holds two 1x1 storage bins or one 2x1 storage bin.

The holes for wall mounting are recessed to take pan head screws.
D.I.Y. TINKERER
[https://www.youtube.com/c/diytinkerer](https://www.youtube.com/c/diytinkerer)

Original concept by [Zack Freedman](https://www.youtube.com/c/zackfreedman)


Gridfinity 2x1 Base Wall Mount

This is a Gridfinity compatible drill bit holder for drill bits from 1mm to 13mm

it holds a total of 27 bits...

**6 - 10mm** in 0.5mm increments (1 of each)
**1 - 6mm** in 0.5mm increments (2 of each)

drills from 6mm - 10mm stack at an angle

for the smaller sizes, the holes are 0.5mm larger than the drill bit intended - this also provides a little leeway for slightly different sized bits

The bit holder is compliant in x & Y axis with gridfinity but not in the z(height) direction not that you will be stacking anything on top of it. I made this mainly to work with my gridfinity wall mount.

DIY TINKERER
[https://www.youtube.com/c/diytinkerer](https://www.youtube.com/c/diytinkerer)

Gridfinity concept by [Zack Freedman](https://www.youtube.com/c/zackfreedman) 

This version has been tweaked in sketch-up

Gridfinity 3x1 vertical drill bit holderv2.stl

3x2 vertical drill bit holderv2.stl


this is a 5x1 **Gridfinity** compatible wall mounted base so that you can add **Gridfinity** modules to your tool wall.

Designed by Me - [please visit my YouTube Channel ](https://www.youtube.com/c/DIYTINKERER)

The Gridfinity concept was originally designed by **Zach Freedman**

Gridfinity 5x1 Wall Mount Base.stl


this is a 5x1 **Gridfinity** compatible wall mounted base so that you can add **Gridfinity** modules to your tool wall.

Designed by Me - [please visit my YouTube Channel ](https://www.youtube.com/c/DIYTINKERER)

The Gridfinity concept was originally designed by **Zach Freedman**


Gridfinity 4x1 Wall Mount Base.stl

This is a reduced filament, quicker print than my previous version. Use this to hold gridfinity 'modules' on the wall i.e. gridfinity can become part of your tool-wall.

Please visit my [youtube channel ](https://www.youtube.com/c/DIYTINKERER) :-) thanks !

Gridfinity concept by **Zack Freedman**

Gridfinity 3x1 Base Wall Mount Reduced Filament.stl

**Hex Bit Holder** for the Gridfinity System this 3x1 module holds 46 hex bits

**Please visit my Youtube Channel **[https://www.youtube.com/c/DIYTINKERER](https://www.youtube.com/c/DIYTINKERER)

[https://www.youtube.com/c/ZackFreedman](https://www.youtube.com/c/ZackFreedman)

Gridfinity system originally designed and made open source by** Zack Freedman **

Gridfinity 3x1x2 Hex Bit Holder x46.stl

**This is a 1x1 Gridfinity module for 14 Hex bits**

Gridfinity system by** Zach Freedman**

please visit my Youtube Channel [https://www.youtube.com/c/DIYTINKERER](https://www.youtube.com/c/DIYTINKERER) :-)


Gridfinity 1x1x1 Hex bit holder x14.stl

This is a gridfinity compatible 3x1x2 container for a hex socket set (originally a Makita set) it holds up to 16 sockets from 5mm to 13mm 

I've designed it for my set which has the following sockets...
 5mmx2, 5.5mm, 6mmx2, 7mmx2, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm

this leaves 3 spaces at 5.5mm, 8mm and 9mm for other sockets.

Gridfinity is based on a design by **Zack Freedman **which he made open source - **_Zack you are Awesome!_**

Please subscribe to my youtube channel [https://www.youtube.com/c/diytinkerer](https://www.youtube.com/c/diytinkerer) :-) thanks!


Gridfinity 3x1x2 Hex Socket Set.stl

A drill caddy for small metric drill bits, it holds 27+ drill bits from 1mm to 13mm 
**Full list of drill bits... **
1mm - 4.5mm in 0.5mm increments (2 each) 5mm - 7mm in 0.5mm increments (1 each) 8mm - 13mm in 1mm increments (1 each) 

+ 10mm hole for misc. bit(s) (e.g. a counter-sink bit) 
+ 100m long tray for misc bits

The holes are square and 0.5mm larger than the intended bits -_ this allows you a little latitude to fit in odd sizes _
[D.I.Y. TINKERER](https://www.youtube.com/c/diytinkerer ) 

**concept: Zack Freedman**


Gridfinity 3x1x4 Drill Bit Caddy.stl

Gridfinity 3x1x2 Drill Bit Caddy.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

the.d.i.y.tinkerer

Achievements

Seedling

Fan Favorite

Explorer