Capstan For 28BYJ-48 Stepper Motor

In order to complete this model, you will need to print 1x BasePlateFolding.stl OR 1x CapstanVasePlateWithGuideAndTabs.stl

1x StopperRing.stl 2x AxelHalf.stl

Construction:

1. Once the Base Plate is printed, you will need to fold the sides up and superglue the joints. Make sure the sides are perpendicular with the base.
2. Put the two halves of the Axle together, and slide through the side with only one hole, from the outside to the inside.
3. Put the Stopper ring on end of the Axle, ensuring the ends are flush.
4. Attach the Stepper Motor and press fit the shaft in to the Axle