Quick-release mount, 2040 extrusion

ClampyMcClampFaceV10.stl

Weed Eater Spool

An auto feeder spool for a Ryobi weed eater.

Ikea Strala Candle Fix

A replacement part to fix the fragile tabs of the original.  Pre-tap the bottom hole with an m6 bolt to avoid damaging the base.

Ender3 Anti-Stringing Bowden Clip (direct-drive mod)

A simple clip designed to reinforce the Bowden couplers on a typical Ender3 direct-drive mod. Alternatively, it can be used to patch worn-out or broken couplers.

Print at 0.1 - 0.16mm layer height with the mouth facing the build surface, petg or abs recommended.

Ender3 Anti-Stringing Clip (for direct-drive mod)

4x4 Puzzle Cube "Bedlam"

Bedlam Cube.stl

Soma 3x3 Puzzle Cube

3x3 Puzzle Cube.stl

Father's Day Trophy

This is a trophy for my dad. I used Make Printable's design from Thingiverse: https://www.thingiverse.com/thing:1617145/files  as the base of this edit. Happy Father's Day!

Printing tips: 
supports not required, print with 2-4 wall lines, _at least_ 4 top layers, and around 20% infill



Tick Remover

A super compact and easy-to-use "tick key" style tick remover. Removing ticks as soon as possible is very important to avoid diseases, and a tick remover makes removal quicker and more efficient. To use, place the wide opening over the body of a tick, press the point against the skin, and drag the tick remover backward to pull the tick by the neck. The tick remover has a hanging hole, so it can be easily attached to a keychain, shoelace, or a dog's collar.

Tick Wedge.stl

Ender 3 Dual-Drive Extruder Mod

Idler lever.stl

Ryobi Weed Eater Spool Cap

weed cap.stl

lawnmower clutch lock

This is a snap-on addition to a gas push mower to keep the clutch, or blade control bar engaged. It should fit onto many typical lawnmowers, just double check that the main handlebar is near 22.5mm in diameter and the clutch bar is 10mm or smaller in diameter. 

Printing tips:
Use around 20% infill,  1.2mm walls, and 1mm top/bottom thickness for strength.

If you keep your lawnmower in a hot garage, also print this in PETG, ABS, or similar material to keep the part from softening

Narrow Schrader Valve Adapter

This adapter is a Schrader-to-Schrader connection designed to be able to connect to a valve in a tight corner. It is a friction fit by design, but for a better and easier seal, an 8mm OD O-ring can be pushed into the female end. The diameter of the female end is 12mm. I suggest printing it in PETG, or PC for strength.

Print Settings:
infill 100%
0.16mm layers
0.5mm line width
brim for adhesion
no supports needed
print at the highest practical temperature for the material used

A Spoon

Just a random spoon for scooping stuff
If anyone needs to know, the volume is about 1.6ml

The Good Shepherd Lithophane

A Lithophane of The Good Shepherd made using this online lithophane generator:[https://lithophanemaker.com/Night%20Light%20Lithophane.html](url).  Original painting by Bernhard Plockhorst in 1923.

Printing:
98-100% infill

best resolution with 0.08/0.12mm layers

Supports not suggested

Brim for Adhesion

Works best with white PLA

Good Shepherd.stl

ender 3 fan duct/mount

ender 3 fan mount.stl

Articulated Minecraft Snowman

minecraft snowman.stl

calligraphy pen

This is a handle that I designed to replace the original. It fits standard nibs.

calligraphy pen.stl

Just a squirrel pretending to be an engineer

Activity related to collaborating with others on models

Likes, comments, and activity from your community

New content from your premium memberships

Emails and messages from designers you follow

Get notified when someone purchases your models or memberships

squirrelinator

Achievements

Seedling

Trailblazer

Up and Coming