Flexure-based, toolless clamp for quickly attaching/detaching aluminum extrusion to a flat surface.

Quick-release mount, 2040 extrusion

ClampyMcClampFaceV10.stl

An auto feeder spool for a Ryobi weed eater.

Weed Eater Spool

A replacement part to fix the fragile tabs of the original.  Pre-tap the bottom hole with an m5 bolt to avoid damaging the base.

Ikea Strala Candle Fix

A replacement part to fix the fragile tabs of the original.  Pre-tap the bottom hole with an m6 bolt to avoid damaging the base.

A simple clip designed to reinforce the Bowden couplers on a typical Ender3 direct-drive mod. Alternatively, it can be used to patch worn-out or broken couplers.

Print at 0.1 - 0.16mm layer height with the mouth facing the build surface, petg or abs recommended.

Ender3 Anti-Stringing Bowden Clip (direct-drive mod)

Ender3 Anti-Stringing Clip (for direct-drive mod)

A 4x4 puzzle cube with a stand for easier solving.

4x4 Puzzle Cube "Bedlam"

Bedlam Cube.stl

A 3x3 puzzle cube. The completed cube measures 30mm. A base is also included to make solving easier.

Soma 3x3 Puzzle Cube

3x3 Puzzle Cube.stl

RoundedCubes.stl

30mm Cube Stand.stl

A trophy for exemplary dadness. I used Make Printable's design from Thingiverse: https://www.thingiverse.com/thing:1617145/files  as the base of this edit. I suggest printing the trophy in a metallic filament, then painting the base, or changing materials mid-print for a dual-color trophy. 

Printing tips: 
supports not required, print with 2-4 wall lines, _at least_ 5 top layers, and around 20% infill



Father's Day Trophy

This is a trophy for my dad. I used Make Printable's design from Thingiverse: https://www.thingiverse.com/thing:1617145/files  as the base of this edit. Happy Father's Day!

Printing tips: 
supports not required, print with 2-4 wall lines, _at least_ 4 top layers, and around 20% infill



A super compact and easy-to-use "tick key" style tick remover. Removing ticks as soon as possible is very important to avoid diseases, and a tick remover makes removal quicker and more efficient. To use, place the wide opening over the body of a tick, press the point against the skin, and drag the tick remover backward to pull the tick by the neck. The tick remover has a hanging hole, so it can be easily attached to a keychain, shoelace, or a dog's collar.

For printing, use a fine layer height of 0.12mm.

Tick Remover

A super compact and easy-to-use "tick key" style tick remover. Removing ticks as soon as possible is very important to avoid diseases, and a tick remover makes removal quicker and more efficient. To use, place the wide opening over the body of a tick, press the point against the skin, and drag the tick remover backward to pull the tick by the neck. The tick remover has a hanging hole, so it can be easily attached to a keychain, shoelace, or a dog's collar.

Tick Wedge.stl

This mod adds dual-extrusion to an ender 3 in the simplest way possible by directly replacing the extruder idler arm. The only parts necessary for this upgrade, besides the original hardware and 3d printed parts, are a set of Bondtech-style extruder gears. The gear spacer is optional, but it makes aligning the gear on the motor shaft much easier. If the previous idler arm has a metal insert to feed filament into the extruder, remove it and press it into the new idler arm with a soldering iron. If not, glue a piece of Bowden tube into the hole


Ender 3 Dual-Drive Extruder Mod

Idler lever.stl

offset extruder base.stl

A replacement for the spool cap on the Ryobi P2003 weed eater.

Print with 100% infill in a durable material such as ABS, Nylon, etc...

Ryobi Weed Eater Spool Cap

weed cap.stl

This is a snap-on addition to a gas push mower to keep the clutch, or blade control bar engaged. It should fit onto many typical lawnmowers, just double check that the main handlebar is near 22.5mm in diameter and the clutch bar is 10mm or smaller in diameter. 


lawnmower clutch lock

This is a snap-on addition to a gas push mower to keep the clutch, or blade control bar engaged. It should fit onto many typical lawnmowers, just double check that the main handlebar is near 22.5mm in diameter and the clutch bar is 10mm or smaller in diameter. 

Printing tips:
Use around 20% infill,  1.2mm walls, and 1mm top/bottom thickness for strength.

If you keep your lawnmower in a hot garage, also print this in PETG, ABS, or similar material to keep the part from softening

This adapter is a Schrader-to-Schrader connection designed to be able to connect to a valve in a tight corner. It is a friction fit by design, but for a better and easier seal, an 8mm OD O-ring can be pushed into the female end. The diameter of the female end is 12mm. I suggest printing it in PETG, or PC for strength.

Print Settings:
infill 100%
0.16mm layers
0.5mm line width
brim for adhesion
no supports needed
print at the highest practical temperature for the material used

Narrow Schrader Valve Adapter

Just a random spoon for scooping stuff
If anyone wants to know, the volume is about 1.6ml

A Spoon

Just a random spoon for scooping stuff
If anyone needs to know, the volume is about 1.6ml

A Lithophane of The Good Shepherd made using this online lithophane generator:[https://lithophanemaker.com/Night%20Light%20Lithophane.html](url).  Original painting by Bernhard Plockhorst in 1923. Reveals the picture when Illuminated from behind!

Printing:
98-100% infill

best resolution with 0.08/0.12mm layers

Supports not suggested

Brim for Adhesion

Works best with white PLA

The Good Shepherd Lithophane

A Lithophane of The Good Shepherd made using this online lithophane generator:[https://lithophanemaker.com/Night%20Light%20Lithophane.html](url).  Original painting by Bernhard Plockhorst in 1923.

Printing:
98-100% infill

best resolution with 0.08/0.12mm layers

Supports not suggested

Brim for Adhesion

Works best with white PLA

Good Shepherd.stl

heatsink fan mount for an ender 3, designed for more concentrated and directed airflow than the original mounting hardware. It clips onto the top of the heatbreak and the Bowden coupler for easy installation and removal. 

ender 3 fan duct/mount

ender 3 fan mount.stl

A posable Minecraft-inspired snowman. The head, torso, and bottom snap together via two clips, which print separately for optimal strength. The arms were designed to connect to the body with 1mm thick wire inserted into holes in the torso and arms. Steel beading wire works best for this. If necessary, superglue can be used in the clip slots under the head and torso, and for the arms.


Articulated Minecraft Snowman

minecraft snowman.stl

This is a handle for a calligraphy pen that I designed to replace the original. It fits standard pen nibs.

calligraphy pen

This is a handle that I designed to replace the original. It fits standard nibs.

calligraphy pen.stl

Just a squirrel pretending to be an engineer

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

squirrelinator

Achievements

Seedling

Trailblazer

Up and Coming