Free this week only, then Tippy will be moved into my memberships program!

Meet Tippy, the cheerful and adventurous foot character who loves to explore and make new friends! With his bright blue eyes and a constant smile, Tippy brings joy wherever he goes. Always on the lookout for fun, he’s known for his quirky sense of humor and can-do attitude. Tippy is not just about fun and games; he also loves helping others find their footing in tricky situations. Whether it’s a race, a dance-off, or just a walk in the park, Tippy is always ready to step up and lead the way!

Software:

 - Nomad Sculpt

If you like my sculpts, consider supporting me through my memberships, where I regularly publish my original creations. Your support means the world to me and helps me continue to grow and create more of what you love in the realm of 3D modeling.

Disclaimer: This model has not been tested for 3D printing.

---

I genuinely appreciate your support and interest in my 3D models. Liking my model and following my profile not only brightens my day but also helps me grow and create more of what you love. Thank you!

Tippy the Foot | Free This Week Only

Inktober 23 - 03 Path Character - Simplified 1.stl

The [bentwood chair](https://en.wikipedia.org/wiki/Bentwood) is a faithful miniature representation of the [redesigned Thonet No. 14](https://en.wikipedia.org/wiki/No._14_chair) bentwood chair popularized in the 19th century (a plastic version was later made by IKEA). It retains the signature curved and steam-bent wooden frame, exuding a graceful and seamless appearance in a scaled-down form (1:10 scale). The chair's small size showcases the iconic elements such as the arched backrest and curved legs, fitting perfectly into dollhouse decor and bringing a touch of historical charm to miniature settings. 

Fun fact: The simple yet elegant bentwood chair has been used as a stylistic element in every Second City show since inception.

Printing Instructions 🪑
Print and glue the Top and Bottom pieces together.

Layer Height: 0.2mm 
Supports: Tree Supports - build plate only, threshold angle of 45 degrees (I don't recommend going below this).
No Brim needed.
If you prefer the ring style, you should print the ring and bottom pieces separately from the "Pieces" section and then attach them using glue. While you can attempt to print the entire chair model, I would advise against it, though you are certainly welcome to give it a try.

---

Hello there! 👋
I genuinely appreciate your support and interest in my 3D models. Liking my model and following my profile not only brightens my day but also helps me grow and create more of what you love in the world of 3D modeling. Thank you – your support means the world to me!

Also check out my other regularly published models.

YouTube: https://www.youtube.com/@spooldesigns
Instagram: https://instagram.com/spooldesigns

Bentwood Chair

Chair - Wiggle.stl

The HueForge Box, a functional solution for showcasing your HueForge 3D prints. 

This model only works for 100x100 HueForge prints.

When printing the HueForge, overlay the "HueForgeFrame" on the HueForge.

Printing Instructions
0.2mm Layer Height

Lid Printing Instructions
Place a pause at layer 24
During pause, Add HueForge print upside down, you may need to slightly bend the HueForge to get it in, it is a tight fit.

If there is another size you would like me to provide, please reach out and I will do my best!

I genuinely appreciate your support and interest in my 3D models. Liking my model and following my profile not only brightens my day but also helps me grow and create more of what you love in the world of 3D modeling. Thank you – your support means the world to me!

Box with HueForge Lid - 100x100

HueForgeLid-100x100-SpoolDesigns.stl

Elevate your display game with the Foldable Picture Display Stand, available in two versatile sizes: 80mm and 160mm. Crafted to be printed in place, this model requires no assembly, offering a seamless and convenient experience straight off the print bed. The stand features a sleek, minimalistic design that complements any decor, making it perfect for showcasing photos, artwork, or promotional materials. Perfect for HueForge users!

Key Features:

- Print-in-Place Design: No assembly required; simply print and unfold.
- Dual Sizes: Choose between the compact 80mm stand for small displays or the larger 160mm stand for bigger frames or items.
- Sturdy and Stable: Engineered to hold your pictures or artwork securely without tipping over. Handles many different sizes.

---

I genuinely appreciate your support and interest in my 3D models. Liking my model and following my profile not only brightens my day but also helps me grow and create more of what you love. Thank you!

If you like my work, consider supporting me through my memberships, where I regularly publish my original creations. Your support means the world to me and helps me continue to grow and create more of what you love in the realm of 3D modeling.


Foldable Picture Display Stand - Print-in-Place (80mm and 160mm)

Display Stand v2 160.stl

**They fight, and bite, 
They fight and bite and fight, 
Fight fight fight, bite bite bite!**

This sculpt, inspired by The Simpsons, is a passion project I created for fun and learning. I hope you enjoy it!

Software:
- Nomad Sculpt

If you like my sculpts, consider supporting me through my memberships, where I regularly publish my original creations. Your support means the world to me and helps me continue to grow and create more of what you love in the realm of 3D modeling.

**Disclaimer:** This model has not been tested for 3D printing.

---

I genuinely appreciate your support and interest in my 3D models. Liking my model and following my profile not only brightens my day but also helps me grow and create more of what you love. Thank you!

Scratchy Head - Simpsons

Inktober 23 - 22 Scratchy.stl

May the 4th Be With You!

100x100mm HueForge Art

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Swap Instructions (included in 3mf file):
- Start with Blue
- At layer #8 (0.72mm) swap to Black
- At layer #10 (0.88mm) swap to Red
- At layer #18 (1.52mm) swap to White for the rest.

Filaments Used:
- PLA+ IIID Max Blue
- PLA Hatchbox Black
- PLA+ IIID Max Red
- PLA+ IIID Max White

May The 4th Be With You HueForge Art

MayThe4thBeWithYou-SpoolDesigns.3mf

This print-in-place small travel container is a versatile and compact solution for carrying small items such as pills, coins, or other tiny essentials. Designed for convenience and portability, this container is printed as a single piece, with the lid and compartment integrated into a seamless design making it perfect for travel or daily use. The small circular design makes it easy to slip into a pocket, purse, or travel bag. Whether you're on the go or just need a compact storage solution, this travel container offers convenience and reliability in a stylish package.

**Printing**
This model was designed to print at 0.2mm layer height.

Print-In-Place Pill Container

Pill Container.stl

Pill Container - Perforated.stl

Welcome to the Supporter Plus Plan, where your backing means the world to me! Here's what you get:

- **Heartfelt Thanks:** Your support is invaluable, and I truly appreciate it.
- **Exclusive Access:** Dive into the whimsical world of my sculpts, reserved just for supporters like you.
- **Design Requests:** Have a brilliant idea or a special request? This plan gives you the opportunity to suggest and request new designs.
- **Advice and Support:** Questions? Having issues with a print? Let's talk about it!

Thank you for being part of my creative journey!

Supporter Plus

Scratchy-SpoolDesigns.stl

Chair - Ring.stl

Ring.stl

Wiggle.stl

Top.stl

Bottom.stl

Bottom - No Wiggle.stl

Tippy.stl

I am a 3D designer that enjoys creating functional and decorative models. I use Fusion 360 for parametric 3D modeling, Nomad Sculpt for 3D sculpting and a Bambu Lab X1C to bring them to life. You can explore my work on Instagram and follow my creative process on YouTube. Follow me for more captivating 3D journeys!

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

spooldesigns

Pinned models

Print-In-Place Pill Container

Scratchy Head - Simpsons

Bentwood Chair

Tippy the Foot | Free This Week Only

Tippy the Foot | Free This Week Only

Bentwood Chair

Box with HueForge Lid - 100x100

Foldable Picture Display Stand - Print-in-Place (80mm and 160mm)

Scratchy Head - Simpsons

May The 4th Be With You HueForge Art

Print-In-Place Pill Container