A 3 piece set of travel hygiene cases. Includes 2 sizes of soap cases and toothbrush and toothpaste case. When opened, it serves as a practical soap dish and toothbrush holder.

Travel hygiene case set

soap holder SMALL bottom.STL

Bubble wrap pen holder is a simple yet fun and satisfying model, that gives a great use to your transparent filament. The outside wrap is made to be printed in the vase mode (spiralise outer contour). Version with and without dividers is included.

BUBBLE WRAP pen holder

BUBBLE WRAP.STL

Pilar planters is unique, perfectly matching, elevated planters set. Each planter consists of 3 parts: Bottom pilar, main body and an insert. Insert has drainage holes and fits like a glove into the main body. Print with no supports. If you want to avoid leaking, use higher amount of top layers and wall lines or coat the inside of the main body with epoxy resin.
NOTE: The thread can be generally printed with no supports on 0.2 layer height. If printing on 0.3 layer height, I recommend slowing down the speed for printing overhangs, as they can create a defects, that might prevent the thread from smooth run.

PILAR planters set

WIDE_top.STL

Fun planters project. The planter comes in 3 sizes - 7 cm, 10 cm and 13 cm.
Print the wrap on the VASE MODE (SPIRALIZE OUTER CONTOUR) for the best results. 

SLUNCE planters

wrap_7 cm.STL

Bubble wrap pen holder is a simple yet fun and satisfying model, that gives a great use to your transparent filament. The outside wrap is made to be printed in the vase mode (spiralise outer contour). Version with and without dividers is included.
The outside wrap is made to be printed in the vase mode (spiralise outer contour).



LAMEL WRAP pen holder

WRAP.STL

A simple pen holder I organizer. No supports, easy print. Print on the vase mode (spiralise outer contour) to save time and material.
Private use only (for commercial use please subscribe to my membership)


QUADRA PEN HOLDER I TABLE ORGANIZER

quatro.stl

This vase design is easy to print item for both standard and vase mode. Comes in 3 different wall thicknesses, so you can choose the right one for your settings. 

Fits a glass up to diameter 68 (66) mm, height 176 mm. 

Print in vase mode (spiralize outer contour) to save a bit of material and print time. If you use vase mode with 0.4 mm nozzle, I recommend setting layer width to 0.6 mm to get a bit more strength. No supports needed.

KRUHY vase

kruhy_1 mm thickness (ORIGINAL).STL

An original triple planter pot with a drip tray.  

6.3 cm openings
Fits on 200x200 printer (diagonally)  :)
Size: 245x90x60 mm

TRIO planter

tray.STL

A cute set of a tray and a box to store your little items. 
Dimensions of the tray: 208 mm x 108 mm

PUDDI jewelry box and tray

This large designer planter pot  features a hidden drip tray. Fits 12 cm diameter plants.

Total dimensions: 
-diameter 130.5 mm
-height 160 mm

VLNKA planter with a drip tray

top.STL

Unique shape planter with legs and a drip tray. Fits well 12 mm diameter plants. NO supports, NO glue.

Inside diameter 12.5 cm, height 11.5 cm

Trojnozka planter with legs

body.STL

This minimalist toothbrush holder features an attachment system to easily hang the cup on the wall. The grid at the top helps you organize your items and the holes at the bottom to avoid water retention. Use two-sided adhesive mounting tape to attach.

Dimensions: 134x74x90 mm

I printed on 0.3 mm layer height. Use supports on the body for the space under the cutout for the holder.

Wall hanging toothbrush holder

This modern and unique planter features a hidden drip tray attached by thread to ensure smooth watering and fun! 
Requires no supports when printing.

Inside planter dimensions: 100x100 mm
Total dimensions: diameter 122 mm, height 133 mm

TIP: Set extrusion width to 0.6 to save printing time!

Swirly planter with a drip tray

Top.STL

This modern minimalist design lampshade is made to fit most of the standard light cords and stands (E24 and E14). I can recommend IKEA Hemma. 

Lattice geometric lampshade

E14 - 30 mm (Ikea Strala, smaller lamps).STL

Minimalist rectangular herbs planter. Simple design with legs, drip tray and drainage holes. NO supports or glue needed, easy assembly.

Dimensions: 
-inner pot space: 197x117 mm, depth 83.5 mm
-outside: 200x120, height 135 mm

Place the legs with the numbers to the build plate and turn on the brim. 

TRUHLIK Herb Planter

bottom.STL

This unique design box is a great choice for storing smaller items such as jewelry, hair ties, etc. 
Print WITHOUT supports

Inner space dimensions: diameter 82 mm, height 36 mm
Overall dimensions: 100 mm x 61 mm

No supports needed - turn them off. I recommend printing on max 0.2 mm layer height.

Elegance Pot jewelry box

UPDATED bottom.STEP

The bigger brothers of my popular hanging planter design available now! These big wall planters are not just scaled, but everything including wall thicknesses, tolerances, and attachment is optimized for the bigger size. 

Attachment: M5-M6 screws.

Height: 144 mm
Inside dimensions: Diameter - 123.5 mm, Height - 112.5 mm.

The original small size model to be found on my profile.

Use supports for the bodies of the planters - supports on the build plate only. 

JUMBO Wall planters

body_waves.STEP

Microgreens hydroponic planter pot. I recommend priting from foodsafe PETG. Designed to plant popular microgreens (raddish, cabbage, brocoli, kolrabi,..) without using any soil, just water. 


NEEDED EXTRAS: spray, seeds, water

How to grow?
1. Spread the seeds on the tray evenly (do not put too much) and fill with water to the full level, so the seeds are under the water. Soak for 5-10 hours and then drain the water.
2. Fill watter so the strainer is ABOVE the water line (seeds are NOT in the water). 
3. Cover with the lid and keep covered. Wet with spray 2 times a day.
4. Uncover the lid once leaves show up. 
5. Keep uncovered and refill and change the water daily. 
6. Harvest the flowers with scissors in 5-10 days depending on the seeds.
7. Enjoy!

To get the rough walls look, I used the fuzzy skin function in the slicer (point distance 0.4, thickness 0.4)

 I printed on 0.3 layer height.



Microgreens hydroponic tray

strainer_UPGRADED(more stiff).STEP

Geometric minimalist lampshade for table lamp / hanging lamp. Fits IKEA lamp stands and cords (STRALA, HEMMA, ...) or any other E27 and E14 attachments (30 mm and 40 mm).
To be printed on VASE MODE (spiralise outer contour) ONLY. Worked great on 0.3 layer height. At least 4 bottom layers are recommended. 

Gear lampshade

gear lampshade E14 30 mm.STL

Unconventional soap holder. Modern and minimalist. With and without a dripping hole option. 

Domes Soap Holder

soap holder with hole.stl

Bowl / pot / planter with a rope imitating design. Final look archieved using a fuzzy skin slicer function. Scalable - original size 136x138x34 mm. 

Rope succulent planter bowl

rope_planter (1).STL

Large geometric simple planter. I recommend printing with the VASE MODE (in some slicers Spiralise outer contour,..).

Outside dimensions: diameter 158 mm (5.22 inch), height 130 mm (5.03 inch)
Inside dimensions: diameter 129 mm (5.07 inch), height 128.5 mm (5.04 inch)

Flowy planter pot

flowy_NO VASE MODE.STEP

Original vase with a folded paper like design. Works great also to be printed with the vase mode to save time. Print the original model on standard mode for increased stength. In the picture the vase is printed from wood bamboo PLA filament.



SLOZENA vase

folded.STEP

Full access to my STLs library.
Early design access.
EXCLUSIVE MEMBERS ONLY designs releases.
 Personal use only.

Full library access 

Unlimited monthly downloads, exclusive designs for members only and commercial licence. Would you like to sell any of my designs? This membership gives you access to all of my models and allows you to become a legal seller of my library for the duration of your subscription.

Commercial licence

I'm Simona,  mechanical engineer who swapped gears for vases and planters. I design 3D models of house decor items - cute but useful (at least I try). Engineering may have been my first love, but designing stylish home pieces is my true passion. Welcome

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

simiu

Achievements

Sapling

Fan Favorite

Explorer

Shooting Star