VESA Adapter for BigTreeTech Panda Touch

Adapter plate to allow the mounting of the magnetic Panda Touch backplate to a 100x100 VESA mount.

There are two versions - the "standard" version uses hex-head screws (1/4"-20). The M4 version supports the more standard M4 VESA screw size.

Required Materials:

• 4x screws, either hex-head or standard M4 screws. The main body of the adapter is 10 mm thick.
• 4x nuts, if using hex-head screws.
• 4x flat head hex screws, M3x10-12 mm. 8 mm will probably also work.

Printing: print flat; settings don't matter too much. You may want to check that the screw holes are appropriately sized, as the screws just go into plastic.

Assembly:

1. If using hex-head screws, insert.
2. Plug in USB cable.
3. Attach the magnetic back plate using the M3 screws.
4. Install the adapter onto the VESA mount, either by installing nuts or using the M4 screws.