knuckles1.stl

powerwasher holder3.stl

pvc holder-1in.stl

dowl holder.stl

ruger start picatinny2 ribs.stl

barrelattach1.stl

p17chew2.stl

1/2 by 28 thread protectors

thread protector.stl

tap holder.stl

paintfilterholder2.stl

carb gasket.stl

carb screw gasket.stl

plantclip2.stl

bottle2bottle.stl

rug2female.stl

pop lid.stl

water jug plug.stl

This is a plug for replaceable 5 gal drinking water jugs. It fits in the small hole in the center of the lid. I use it when I take the jugs to be refilled.  Print it in TPU for strength and flexibility.


stylus holder.stl

This is a stylus holder for graphics tablet.  Could be used as a pen holder also.

hard hat hook.stl

This is designed for a 2014 dodge truck. You will need to take some measurements to see if it will fit others.  Take the head rest off, slide it on the rod and replace the head rest.
Don't print in pla, it will deform.  I printed in petg and it has been fine.


4.6.stl

This is a replacement connector for the vacuum line that goes out the back of the intake manifold on Ford Triton's.  It was made for a 98 F-150.  The rubber ones eventually crack and you get a vacuum leak.
It should be printed with TPU and several exterior walls so that it doesn't leak.
Might have to heat it up to get the plastic line inserted.
Might get you by until you can get the rubber one.

pwhead holder-tpu2.stl

Power washer tip holder.  Print with TPU and high infill.  You want it to be stiff so the tips will be held in place.  There is a rim that fits into the groove in the power washer tip.

charged.stl

8 spot usb.stl

8 spot usb holder that you can mount to your desk.

dead man flapper.stl

This is a replica of the flapper on a sand blasting hose dead man.  The holes may have to be drilled slightly for the screw to be pushed through.
This was made as a practice piece and I am not responsible if you were to actually use it.


spacemouse holder.stl

This is a spacemouse Navigator holder.  It screws down so you can have it extent off of your desk. It keeps it in place and give you a little more room.

shadow575757

Achievements

Seedling

Explorer

Debutant