Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3354458.

Sandevice E6804 CG-1500 Mounting Plate. Use #6 1/2" or 3/4" sheet metal screws. Designed to have hole spacing for anywhere in the CG1500.

Sandevice E6804 CG-1500 Mounting Plate

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3354447.

Meanwell mount for CG1500 Door. Print two per case. Use M4 machine screws to attach the mount to the power supply and #6 1/2" sheet metal screws to attach the mount to the CG1500.

Meanwell CG1500 Door Mount

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3379407.

Sandevice E682 mounts for the CG1500. Print 2 and use #6 1/2" and #6 3/4" sheet metal screws. Use the 3/4" screws for the top holes and screw through the Controller and mount, into the case standoffs. Use 1/2" screws for all the other holes.

Sandevice E682 CG1500 Mounts

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4909726.

This is a controller/HP power supply mounting system for a Bud Box 32022. Plastic parts are screws together with 8-32 machine screws. Mount is attached to the bud box with #10 3/4" sheet metal screws. 

Origonal Files are on Onshape:
https://cad.onshape.com/documents/af82e9abfc32955904e3ee00/w/60f0b4fc7e6702844ee6a321/e/56753b9e64ee1a9ddbd30496

Bud Box 32022 HP Power Supply and Controller Mount

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4801094.

A Clip to attach C9 Style Pixel Bulbs to 3/4" PVC pipe. I added holes to add a screw if needed to prevent the clip from spinning on the PVC.

PVC Clip PixieBulbs

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3023059.

P10 Mount for Colorlight board. First STL was intended for nuts on the back side. "Self Tread" STL is for just using #6 sheet metal screws into the plastic. "End Mount" used the same self threading holes but moved the mounting tab to the end.

Colorlight P10 Mount

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4651202.

This clip is inserted into a 1/2" PVC pipe and allows it to clip on to a 3/4" PVC pipe

3/4" to 1/2" PVC pipe clip

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3345640.

Keurig K-Mini Plus Table 

Keurig K-Mini Plus Table

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4651222.

1/2" Coro PVC Mounts for coro props. #6 Sheet metal screw is used with "1-2 PVC Mount.stl" #6 machine screw is used with "1-2 PVC Mount_2.stl" 

1/2" Coro PVC Mount

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4134335.

 Right Angle Mount for a meanwell power supply. Print at least two, one for top and bottom.

Meanwell PS Right Angle Mount

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3843325.

This clip is inserted into a 3/4" PVC pipe and allows it to clip on to another 3/4" PVC pipe

3/4" PVC pipe clip

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3829508.

FPP PB16 mounts for the CG1500. Print 2 and use #6 1/2" and #6 3/4" sheet metal screws. Use the 3/4" screws for the top holes and screw through the Controller and mount, into the case standoffs. Use 1/2" screws for all the other holes.

FPP PB16 CG1500 Mounts

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4651204.

Use this to attach a meanwell power supple to a CG1500 backer plate.

Power Supply Mount

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4651206.

Bracket to prevent flexing on large P5/P10 panels. Attach to a middle panel and attached to a cross member behind the panels.

P5 L Bracket

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4577554.

Dump Falcon Receiver CG1500 Mount. Use #6 1/2" and #6 3/4" sheet metal screws.

Dump Falcon Receiver CG1500 Mount

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4589156.

15 Pixel Star for Mini Tree. Designed for 230mm x 210mm bed.

Mini Pixel Tree Star

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

scooter.seh

Achievements

Seedling

Trailblazer