Sometimes the filament spool moves too far forwards, so I modelled up this to keep spools closer to the filament run out sensor, I just used 3 walls 0.25-layer height and 25% infill and cubic.

Creality V3 KE Filament spool retainer..stl

CR-6 Max filament runout sensor adaptor for Micro Swiss extruder, there is enough clearance between the runout sensor adaptor case and the printer frame at full height, the axle for the roller and knob is just 5mm wooden dowel, the two holes are sized for the 3mm threaded brass inserts in the filament run out sensor case, there is a 5deg offset with the two different top spool holder and filament run out sensor case that keeps the bowden tube straight between the two.

CR-6 Max Filament run out sensor support.stl

CR-6 Filament run out sensor support.stl

Dremel router base 120mm 

008-Small opening-120mm base Dremel Router.stl

010-Urinal bottle stand.stl

Sunlu filament latch, My solution to keeping the cover closed on the Sunlu filament dryer while printing, when gluing the halfs on keep it all together with the hinge rod in 5mm bamboo skewer rod then glue either half first then when gluing the second half hold a little tension so it's all snug when finished.

Sunlu filament dryer latch for case.

I have thickened a few  areas, Towel rail hook to hold bath mats ETC

Updated version Towel rail hook peg

Towel rail hook peg to hold bath mats ETC

Towel rail hook peg

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

scoot1966

Achievements

Seedling

Trailblazer