One more request from my kid, a smaller butterfly in the shape of a katana.
You will need:
4x Screws: 3mm in diameter and 10mm long 4 nuts: 3mm
Video with a small demonstration of the katana in action: https://youtu.be/usRYMiP3Adw
The initial layer may be challenging, so if needed, decrease the speed of the first layer.
Assembly:
The handles are different from each other. Both handle 1 A and B should be assembled together, and the same applies to handle 2 A and B. Handle 1, with the blade open, should be placed underneath, and handle 2 on top. Please refer to the image for orientation.
Print Settings: Material: PLA Layer Height: 0.2 Infill: 15% Walls: 3 Supports: No Brim: No Raft: No Supports: No Change filament during print: Yes, make your own color schemes :)
Enjoy. If you have any questions or suggestions, hit me up in the comments. And if you wanna support me, give it a like, download it, and share it with your friends. Happy printing!