***Model originally uploaded to Thingiverse at*** https://www.thingiverse.com/thing:5828734

***Concept***
A 5.5mm endoscope mounting plate for the Petsfang Bullseye.


***Usage***
You will need to print:
- [1x] Endoscope mount

You will also need a M3x10 (or longer) screw and nut, as well as double side tape (optional).


***Updates***
2023.02.01 - Initial release. **NEW:** 5.5mm nozzle endoscope Mount Bullseye Front v2

***History***
Had a go at making my own endoscope mount using the BLTouch mount on the side, but ended up giving up due to my endoscope constantly shifting in the PLA mount (it heats up with the LEDs enabled), so I moved it to the front using the Bullseye Insert plate template (thanks dpetel for Bullseye and panpankiss for blank template stl). 


***My Print Settings***
**Printer Brand:** Creality
**Printer:** Ender 3 Pro
**Rafts:** No
**Supports:** Print with flat side down. Supports are optional(?)
**Resolution:** 0.12
**Infill:** 15%
**Filament:** SUNLU PLA Black


5.5mm Nozzle Endoscope Mount for Bullseye

***Model originally uploaded to Thingiverse at*** https://www.thingiverse.com/thing:5828734

***Concept***
A 5.5mm endoscope mounting plate for the Petsfang Bullseye.


***Usage***
You will need to print:
- [1x] Endoscope mount

You will also need a M3x10 (or longer) screw and nut to keep the endoscope from slipping and rotating.


***Updates***
2023.02.01 - Initial release. **NEW:** 5.5mm nozzle endoscope Mount Bullseye Front v2

***History***
Had a go at making my own endoscope mount using the BLTouch mount on the side, but ended up giving up due to my endoscope constantly shifting in the PLA mount (it heats up with the LEDs enabled), so I moved it to the front using the Bullseye Insert plate template (thanks dpetel for Bullseye and panpankiss for blank template stl). 


***My Print Settings***
**Printer Brand:** Creality
**Printer:** Ender 3 Pro
**Rafts:** No
**Supports:** Print with flat side down. Supports are optional(?)
**Resolution:** 0.12
**Infill:** 15%
**Filament:** SUNLU PLA Black


Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4754564.

The original design by [@Stiggan2k](https://www.thingiverse.com/stiggan2k/designs) is great, and the chains work amazingly, however I found was the part that attaches to the former extruder motor plate does not fit my Ender 3 Pro. It seems like the Ender 3 Pro has a different sized plate as the screw holes doesn't match up. 

I split the model using Microsoft's 3D Builder, and extended the model so the holes (hopefully) will match up. Haven't found out how to modify mesh models with Autodesk, so forgive the noobness of this remix.

All credits goes to the original designer.

02/07/2021: Remix V1 released.

[Ender 3 Pro] [Remix] Ender_3_Extruder_Cable_Chain_Base

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4755657.

The original design by [@Stiggan2k](https://www.thingiverse.com/stiggan2k) was designed for a custom direct extruder part that wasn't applicable to me, so I made my own design to be plugged into a direct extruder plate (the one I got was this: https://www.amazon.com/dp/B08LC8FZ1R/).

I measured the original model and tried to replicate it in Autodesk Fusion 360, thus ended up with the current design. Still a beginner at Autodesk and 3D modeling.

All credits goes to the original designer.

02/08/2021: Remix V3 released.

[Ender 3 Pro] [Remix] Direct_Drive_Cable_Chain_Base

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4446024.

I really like pellcorp's ["Simple PiCam v1.3 mount"](https://www.thingiverse.com/thing:3858292), but it was too tight to fit an Arducam 5MP Pi Camera. I broke my camera's LED trying to fit it in, so I thought I'll make one myself. While this was designed from scratch, I've taken inspiration from others, so credits to all those pi camera holder designers!

Works well with modmike's ["Creality Ender3 Pi Cam Mount"](https://www.thingiverse.com/thing:2886101)

The case holds the camera in place with some wiggle room. Let me know if a tighter case is in demand.

First time making a 3D model, so let me know if it needs some improvements!

06/12/2020: V1 released.

Arducam Pi Camera Case/Holder

***Model originally uploaded to Thingiverse at*** https://www.thingiverse.com/thing:5713438.

***Concept***
A mounting system for IKEA KALLAX shelf.


***Usage***
You will need to print:
- [1x] Center Mount 
- [1x] *(whatever part)*

You will also need a countersunk M5x12 (or M5x10) screw to connect the two parts together.


***Updates***
2022.12.14 - Initial release. **NEW:** Center Mount v1, Headphone Holder v1
2022.12.15 - **NEW:** 4-Way Cable Clip v2
2022.12.27 - **NEW:** Center Mount (Short) v1, Adapter to HeyVye Modular Mount System v3, Controller Holder v1, 100mm Split Mount v1, 130mm Split Mount v1
2022.12.28 - **UPDATE:** Controller Holder v1 to v4
2023.07.14 - Description update to mention requiring a countersunk screw.

***History***
Was looking for a headphone holder that mounts to the cross/center part of a IKEA KALLAX shelf, but since I didn't find one, I thought I'll make one myself. Maybe someone will find this useful as well. Might add more modules soon.


***My Print Settings***
**Printer Brand:** Creality
**Printer:** Ender 3 Pro
**Rafts:** No
**Supports:** Check part instructions
**Resolution:** 0.12 ~ 0.28
**Infill:** 15% ~ 100%
**Filament:** SUNLU PLA Silver


***Notes***
**Center Mount** - Print vertically with the "legs" on top. Supports are required.
**Headphone Holder** - Print vertically. Supports are optional (highly not recommended).
**4-Way Cable Clip** - Print as is (sideways). Supports are required.
**Center Mount (Short)** - Print vertically with the "legs" on top. Supports are required.
**Adapter to HeyVye Modular Mount System** - Print with the three holes flat side down. Supports are required.
**Controller Holder** - Print with the mounting hole down. Supports are required.
**100mm Split Mount** - Print with the flat side down. Supports are required.
**130mm Split Mount** - Print with the flat side down. Supports are required.

robonxt

Achievements

Seedling

5.5mm Nozzle Endoscope Mount for Bullseye

[Ender 3 Pro] [Remix] Ender_3_Extruder_Cable_Chain_Base

[Ender 3 Pro] [Remix] Direct_Drive_Cable_Chain_Base

Arducam Pi Camera Case/Holder

Modular Kallax: A modular mounting system for IKEA KALLAX shelf series