After looking at the many 3D designs for soap dishes I decided that there was room for improvement.
This design has a shallow top insert which is easy to lift off for rinsing under a tap when the base is drained.
The insert has smooth edges so that the soap does not get dented when it is dropped onto the dish.
1 Likes3 DownloadsNovember 22, 2024
1 Likes3 DownloadsNovember 22, 2024
Instructions
Filament • 0.4mm
MaterialPLA
Layer height0.4 mm
Infill density5 %
SupportsNone
BrimNo
Filament • 0.4mm
MaterialPLA
Layer height0.4 mm
Infill density10 %
SupportsNone
BrimNo