Kikiriki and Serama-Type Chicken Eggs Basket Replacement for Maticoopx 30 or Zohoko 24 Incubators
22 downloads · 9 months ago · Replacement Basket for Kikiriki and Serama-Type Chicken Eggs:
Maticoopx 30 Egg Rack: Holds exactly 1
This model is restricted by licensing terms.
View license.
Replacement Basket for Kikiriki and Serama-Type Chicken Eggs: Maticoopx 30 Egg Rack: Holds exactly 10 eggs
Each egg slot is tapered to hold eggs ranging from 0.75" to 1.25" in diameter Bottom: 0.75" diameter Middle (cradle): 1.0" diameter Top: 1.25" diameter
🖨 Recommended Print Settings: Material: PETG (preferred) Layer Height: 0.28 mm Infill: 15% Supports: Not required NOTE: In your Bambu slicer, go to the "Quality" tab and change the "Wall generator" from Classic to Arachne. This is because the walls are thin towards the outer rim.
Orientation: Print upside down flat on the bed for best results
Print replacements anytime with this .STL file, so you’re never caught unprepared during incubation season.
Kikiriki and Serama-Type Chicken Eggs Basket Replacement for Maticoopx 30 or Zohoko 24 Incubators
22 downloads · 9 months ago
This model is restricted by licensing terms.
View license.
Modern Egg Carton for Button Quail | 11 Eggs
Ring Platter for Deviled Quail Eggs – 3D Model (Single STL File) Print your own elegant and modular
Single Deviled Quail Egg Platter – 3D Model (STL File)
Dual-Level Deviled Quail Egg Platter – 3D Model (STL File)
Sailnovo 24 Incubator 1.5" Riser
Compact Quail Water Dispenser
Tiny Button Quail or Parrot Egg Tray for Hatching Time Cimuka Incubators
Kikiriki and Serama-Type Chicken Eggs Basket Replacement for Maticoopx 20
Jumbo Quail Egg Tray – Fits Large Circular Incubator (see picture for incubator model))
Maticoopx 30 Incubator 1.5" Riser
Button Quail Eggs Basket Replacement for Maticoopx 30 or Zohoko 24 Incubators
Regular Quail Eggs Basket Replacement for Maticoopx 30 or Zohoko 24 Incubators
Jumbo Quail Eggs Basket Replacement for Maticoopx 30 or Zohoko 24 Incubators
Maticoopx 20 Incubator Tray for Chicken Eggs
Maticoopx 20 Incubator Hatching Divider
Maticoopx Incubator Parrot or Tiny Button Quail Egg Tray
Maticoopx Incubator Quail Egg Tray (Regular sized eggs)
Maticoopx 30 Incubator Hatching Divider
ChickCozy Incubator Hatching Divider
Hello. I purchased both this .STL file and the one for the Maticoop 20. Unfortunately, the Maticoop 30 egg tray is not printing correctly. I have adjusted all settings to your recommendations above and have tried different filaments to make sure it wasn't my products and I can not get it to print correctly. The Maticoop 20 egg tray prints perfectly. Is there anyway you can check the uploaded STL on the Maticoop 30 egg tray? Thank you.
Hi. In your Bambu slicer, go to the "Quality" tab and change the "Wall generator" from Classic to Arachne. That should help with the missing thin wall. thanks