Bring the mischievous Stripe to life in detailed 3D form. As the ruthless leader of the Gremlins, Stripe is instantly recognizable with his white mohawk, sharp grin, and chaotic personality. This model captures his menacing look and rebellious attitude, making him a perfect addition to any Gremlins collection. Whether displayed on his own or alongside Gizmo, Stripe is ready to bring a little movie monster mayhem to your shelf.

Dimensions: At 100% scale, Stripe stands approximately 7.87 inches (200mm) tall. If you plan to scale the model up, the white chest piece may be a little tricky to install at first. Once aligned at the correct angle, it should snap into place without issue.

Scaling the model down may tighten tolerances and reduce the detail of the multicolor parts.

Colors Used: Bambu Basic: Brown, White, Black Esun PLA+: Beige

Print Profile: This model is designed to be assembled from separate parts. However, several pieces can also be printed in multicolor, including the head with integrated eyes and the eyes by themselves.

Because the AMS eyes are printed at a slight angle, a small gap may be visible when they are installed in the face. For the best fit and overall appearance, I recommend using the multi part eye pieces instead.

Two print profiles are included: one for Bambu printers and one for the Snapmaker U1. Please note that the Snapmaker U1 profile contains only the multi-color components, not the complete model.

Assembly Tips: The chest piece can be a little tricky to install at first. For the easiest fit, align it slightly lower than straight on. Once the piece starts to slide into place, angle it upward slightly and continue pushing until it is fully seated.

Assembly Steps: Attach the white chest piece to the body. Once you find the correct fit, remove it, apply a small amount of glue, and secure it in place. Attach the legs to the body, followed by the feet. Attach the white arms to the body, then add the hands. Attach the mohawk to the head. Attach the white hair pieces to the ears, then insert the pins into the ears first before attaching them to the head.

If using the pinned beard, the mouth may feel tight when installing for a fully flush fit. For the best result, glue the mouth in place first, then attach the beard without using the pin.

Assemble the eyes and attach them to the face. The multi-part eyes are recommended since they print flat and provide a cleaner fit.

Finally, attach the head to the body using the pin to complete the model.

You’ve brought the mischievous and chaotic Stripe to life. From his sharp white mohawk and menacing grin to his detailed features and wild personality, he perfectly captures the unforgettable look of the Gremlins’ most infamous troublemaker. Ready to cause a little mayhem in your collection, Stripe is sure to stand out in any display. Thank you for printing this model and for supporting Playco3D. I’d love to see your finished print, so be sure to share your photos!