Meet Iggy Koopa — the wild, wacky, high-energy member of the Koopa Kids brought to life as a multi part 3D print. This model is designed for easy color printing, fun assembly, and a bold display piece that captures Iggy’s chaotic personality perfectly. Get ready for bright colors, crazy hair, and that signature Iggy attitude on your shelf!

Dimensions: At 100% scale, Iggy stands approximately 11 inches (280 mm) tall. If you want to match the older Mario figure scale, simply scale this model down to 80%. Scaling up should work fine. If you scale down further, keep in mind that tolerances will tighten and assembly may become more challenging.

Colors Used: Bambu Basic: Black, White, Yellow, Red, Green, Silver, Maroon Red (Inside Mouth) Bambu Matte: Sky Blue, Yellow, Desert Tan, Apple Green *Creality Hyper Series: Very Peri (Shell Rings) *Alternative Bambu Color: Bambu Basic: Purple

Printing Profiles: I’ve included two versions of Iggy for you to print. If you prefer not to use an AMS, or just want a different look, you can choose the Closed Mouth version.

If you want the full detail, you can print the Open Mouth version with AMS. Additional you can use your AMS for simplier assembly such as:

Eyes Hands and claws Body foot claws Shell spikes Arm bracelets with spikes

Choose the style that fits your setup and printing preferences!

Assebly Tips: Iggy’s shell has some unique spikes, so to make assembly easier, the green shell is marked with numbers 1–4. These match the markings on the purple shell rings and the tan spikes. The remaining three spikes are identical and are not marked. If you are printing the spikes with an AMS, check the number on the underside of each full spike to identify its correct part.

When choosing which version to print (open or closed mouth), make sure to print the parts from their assigned profiles. The head, body and chest are designed specifically for that version. Even if they look similar, they will fit differently.

The teeth have unique markings to help you identify each piece. The right-side teeth have small diamond cuts, and the left-side teeth have rectangular cuts at the bottom. The markings should face outward, away from his mouth. Use the reference picture in the folder.

Assembly Steps: Attach the foot claws to the body. Insert the chest piece, carefully lining it up and pressing it in firmly. Build the hands with their claws, paying close attention to claw orientation. Assemble the spike bracelets and attach them to the body using the pins, then add the hands. If using the open mouth version, apply a small amount of glue to the tongue and drop it inside the mouth. Use a pen or small tool to help center it. Attach the teeth following the instructions above. Build the eyes, then insert them into the glasses. Press the glasses firmly into the mouth, then slide the glasses and mouth onto the green head with glue. Once the face is assembled, attach it to the body using the pin. Glue the two hair pieces together with the pin, then glue them onto the head. Assemble the shell with all the spikes, following the instructions above. Build the wand, slide it into his hand, and your model is complete! Place the face in first, then glue the black neck piece to the face under the helmet using

Thank you so much for printing Iggy. I hope you have a blast putting this wild Koopa Kid together and adding him to your Mario lineup. I’d love to see your finished build, so be sure to share your photos or videos and tag Playco3D. Enjoy your new print and happy building!