Fox Snout Mask by Perihelion Prints

======

Snout mask based on the muzzle of a fox, complete with a mouth and nose. Suitable as the basis for a fox or other canine costume. Could be worn as-is, or in combination with "ears" and/or face paint.

Scaled to fit larger adult heads, but you may want to do a test print to confirm fit and scale accordingly.

For attachment to your head, you can attach cord or ribbon. Hot glue works well. Ideally you will want four roughly equal strips, that you can attach to the corners of the mask, leaving you with a chin strap and a strap you can tie around the back of your head.

Designed in Blender. STL and .blend files included. Dimensions in millimetres.

======

"Cat Ears" used in demo render (https://www.printables.com/model/35076-cat-ears) by RoboMagus is licensed under Creative Commons CC0 - Public Domain license (https://creativecommons.org/share-your-work/public-domain/cc0/)

"demo_dress" used in demo render (https://skfb.ly/opoQD) by emilysa is licensed under Creative Commons Attribution (http://creativecommons.org/licenses/by/4.0/).

======

0.20mm layer height recommended.

Tested with "snug" supports. Organic supports will take longer but may come off cleaner. This print in particular was with older filament, so it's not always that burred.

PLA/PETG recommended.

Filament Usage (estimated): 120g

Printing Time (estimated): 7h

^ Estimates based off slicing for Prusa MK3.9. Your mileage may vary.

After printing, you may want to sand, prime, and paint it, or you can keep it in the base colour.