Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4393546.

I needed a simple lightweight x-carriage for Pitan direct extruder when building an [iTopie](https://www.thingiverse.com/thing:888609). It should work on any i3 design with 45mm apart 8mm rods and GT2 belt for the x-axis.

The x-carriage has been redone in Tinkercad but is heavily based on [beyondwind's x-carriage](https://www.thingiverse.com/thing:982921). The motor mount is the base one from the [Pitan](https://www.thingiverse.com/thing:2728600), the belt holder is imported directly from zisoft's [Anycubic I3 Mega Prusa i3 X-Carriage Converter](https://www.thingiverse.com/thing:3495652).

 Remix it at https://www.tinkercad.com/things/fXKCBAp0ujE

Pitan i3 x-carriage

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3940673.

I wanted to use an E3D V6 with a direct extruder on my Prusa Mendel. But couldn't find matching extruder and x-carriage. The Pitan extruder looked like a good option but still no matching x-carriage. The distance between the bearing holder on dvjcodec's x-carriage is just the 30mm needed for the hothend fan and its duct, so I just cut a hole in it with Tinkercad, made a mount for the Pitan and voila.

This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/d8t6IqRCA45

Note: There is no room to secure both bearing on the fan side with zip tie. But it seems the weight of the full carriage with zip ties on three bearings it enough to keep the fourth one in place.

RepRap Prusa Mendel X Carriage for E3D V6 with Pitan extruder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4654916.

Quick mashup of two instances of the [original holder](https://www.thingiverse.com/thing:2459817) smashed together in Tinkercad.

Oral B stand with brush holder 2x

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2513817.

Mini hand spinner for small 623Z bearing.

Spinner body is a customized version of http://www.thingiverse.com/thing:2038582, the grips are made with Tinkercad.

Mini spinner

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4654721.

A quickly made case for [Game Boy WiFi Printer - D1 Mini Shield](https://github.com/cristofercruz/gbp-esp-shield-pcb) with cable soldered to PCB.

Gameboy Printer Wifi Emulator Case

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:1918114.

Simple mount to attach a LJ18A3-8-Z/BX inductive proximity sensor to the fan mount of the x-carriage.

This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/fvgq69NC6eL

Z-Probe mount

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4528878.

Remix of https://www.thingiverse.com/thing:4164946 's Vesa 100x100 parts

- thicker wall part (+10mm) to give more room to tilt the screen
- enlarge wall parts mount screw hole for 1/4" concrete screws
- M8 nut traps on both end of the monitor part
- Enlarge monitor side screw holes to for 5/16" bolt to attach a easy mounting braked (https://www.thingiverse.com/thing:2391417)

Note: Ensure high infill and lots of perimeters for the wall parts.



This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/kj3H3YQX30A

Vesa Wall Mount (remix)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4353925.

Mason Jar Mini Greenhouse

Idea from https://www.thingiverse.com/thing:2572206 and https://www.thingiverse.com/thing:2813958 and likely many other seen while searching for one.

Mini Greenhouse (Mason Jar)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3954824.

I needed a mount to add a 40mm fan to the read of my x-carriage.

Instead of adding it on top of the belt clamp, I merged them into the design.

Made to fit my [customized E3D V6 x-carriage](https://www.thingiverse.com/thing:3940673) but should fit any x-carriage with the same belt clamp dimensions and spacing. 

This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/jz9y07DFGqX

Rear Fan Mount / T2.5 x Belt Clamp for RepRap Prusa Mendel X Carriage

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4725479.

It's a coin, it has the [banano](https://banano.cc/) logo on it.

Post a make with your ban address I'll send you 42 BAN.

Banano Coin

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:1275559.

Basic remix of [fabrykator's RepRap Prusa Mendel X Carriage](http://www.thingiverse.com/thing:31021) to add a Z probe mount.

RepRap Prusa Mendel X Carriage - Total X UDS with Z probe mount

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3803154.

My cooler has a small pipe in the bottom on one side to easily get the water from melted ice out. The original one broke quickly. To avoid having a leaking cooler, I designed a simple pipe cap for it.

Cooler Pipe Cap

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

pbuyle