I designed these blocks to be able to build real life minecraft tools.
There are 4 type of blocks, each with increasing number of square holes that can be use with the stud (also printable) to connect them together.

Minecraft blocks

Cubo4.stl

These are trays for Lego brick.
Once opening lego bags, I always find myself with the a lot of bricks scattered around the table.
So I designed this trays to easy sorting and picking up the right brick.

Lego brick trays

Lego Tray big.stl

Simple tea bags organizer for drawers or wherever you want to put in in your kitchen.


Tea bags organizer

This is a case and mount that replace the original display and relative mount.

Once print all parts, place 4 threaded inserts in the two foots, then screw the foot on the bottom the 4x M3x8 screws, then screw the display in the box with 4 M3 screws.

The top cover simply snap on the bottom, no screws are required. To install on the printer, you need 2 M3 screws and 2 T-nut.

To connect the display to motherboard (Mine is a BTT Manta M8P) you need two 50 cm  FPC cables with 90 degree FPC HDMI Connector (mind that the short side is facing up) and a 90 degree USB-C connector for power and touch.
On motherboard side I use a FPV straight micro HDMI and a straight USB A connector.

Flying Bear Reborn 2 case and mount for BTT HDMI7

Top.stl

Despite the fact that i discourage this mod, this is a plate to mount de BTT Manta M8P in place of the original MKS  Robin motherboard. This plate keep Manta raised from the bottom, leaving free the underneath cables. On the right side there are 2 hole to mount the original fan.
To assemble it you need 8 threaded insert M3x5,7x4,6 and 4 M3 x 6mm screws and M3 x 8 mm screws.

FB Reborn 2 mount plate for BTT Manta M9P

Piastra.stl

This are a reversible jaws for the popular mini vice availabile on Amazon and on chinese stores.
Is reversible, so you can choose between small diamonds and pipe holder (the stock jaws don't hold small cylinders very well).
You can print in PLA with 0,2 layer size. Infill at you choice (15% or less) with at least 3 perimeters.

Small vice jaws

This is my interpretation of the famous Rush Hour game
Let me know if you like it.

# Print tips
The board is not difficult to print and do not require supports.
Blocks are better print upside down
Car and truck need supports and some sanding at the edges to slide smoothly over the board.

In total you need to print:
* 1 board
* 2 blocks
* 10 + 1 cars (print one car in a different color, this one will be the car to free)
* 4 trucks

To find hundreds of play schemes here: https://www.michaelfogleman.com/rush/

Rush hour table game

RushHoursCar-v6.stl

This is a holder for my Tacklife (or other chinese clones) rotary tool bits. 
Holes have a diameter of 3 mm for bit with 2.5 mm shaft. There is a bigger hole for the spindle adapter.
Check my other models for a holder for the rotary tool.

Gridfinity Tacklife rotary tool bits holder

Gridfinity holder for Tacklife (or any other chinese clone) rotary tool.
Check my other models for related bits holder.

Gridfinity Tacklife rotary tool holder

I don't like other Gridfinity pliers holder, so I manage to make my own version.
This version is not suitable to put into drawers (unless they are very tall), I think it  placed on my desk.

Gridfinity Pliers holder

Gridfinity Pliers v5.stl

This is a holder for Parkside PASD 4 B2 battery screwdriver (or similar model).
The holder can accept other tools, It have a big hole of 20.5 millimeters of diameter and six little holes of 10 millimeters of diameter for bits. I left a space around holes so you can put in other stuff.

Gridfinity Parkside PASD 4 B2.stl

This is a tools carousel for Gridfinity system
I search for a long time a stand to put my tools.
Those sold in stores are too expensive and the cheaper ones are simply toys.
I've found some stl models on line, but they are too complicated to print, or require a lot of time and material.
So I decide to design my version from scratch, inspired from models I saw on line.
This is divided in three parts:
The bottom, the column and the top.
I strongly suggest you to print the column in vase mode (option Spiralize Outer Contour in Cura) to save time and material.
When assembling the three parts, put a drop of Superglue on the column joints.

About print setting:
Layer: 0.2
Infill: 20%
Material: PLA

Look my other model for non Gridfinity version of this tools carousel.

Gridfinity Tools Carousel

ToolCarouselColumn.stl

ToolCarouselTop.stl

This is a tools carousel.
I search for a long time a stand to put my tools.
Those sold in stores are too expensive and the cheaper ones are simply toys.
I've found some stl models on line, but they are too complicated to print, or require a lot of time and material.
So I decide to design my version from scratch, inspired from models I saw on line.
This is divided in three parts:
The bottom, the column and the top.
I strongly suggest you to print the column in vase mode (option Spiralize Outer Contour in Cura) to save time and material.
When assembling the three parts, put a drop of Superglue on the column joints.

About print setting:
Layer: 0.2
Infill: 20%
Material: PLA

Column and top parts are suitable for my Gridfinity Carousel (look at my other models)

Tools Carousel

90 degree corner guide

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

pattarom

Achievements

Seedling

Explorer

Fan Favorite