Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6292727.

# Synopsis

This is a case protector for the Powkiddy RGB30 complete with a [pico-8](https://www.lexaloffle.com/pico-8.php) logo on the back. In combination with a display protector, it should shield your powkiddy from falls, scratches and other abuse. This case is meant to be flexible and should be printed in TPU or a similar flexible filament.

I designed this model using [SolveSpace](https://solvespace.com/index.pl). You can download the original model files from this project's [GitHub repository](https://github.com/nuxnik/powkiddy-rgb30). All likes, constructive criticism and comments are greatly appreciated.  For more models like this check out my profile or visit [my blog](https://nuxnik.com).

Powkiddy RGB30 Case Protector

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6276014.

# Synopsis

I bought a Powkiddy RG30 mainly for pico-8 game development and as a dedicated pico-8 gaming device. The RGB30 doesn't come with a case, so I decided to model one. Before starting, a solid model is useful to work with - keeping the model in scope. I figured the community would find this model useful. Use it for your own custom case mods, holders, wall mounts, etc. When my case if finished, I will be posting it on my profile, so make sure to follow me for updates.

# Resources

You can download and modify my original files from my github repo: https://github.com/nuxnik/powkiddy-rgb30

I modeled this project in [Solvespace](https://solvespace.com/index.pl). 

Powkiddy RGB30 Reference Model

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6203695.

Let's build a lightweight tiny whoop with a top loading battery, carbon fiber frame and high KV motors. This project is a build guide for a 65 mm tiny whoop that was highly inspired by the [Fractal65](https://store.fractalengineering.net/product/fractal-65-bnf) tiny whoop by [Fractal Engineering](https://fractalengineering.net). This project was built in the “fractal whoop style”. In other words, this design is light-weight and stresses minimalism and robustness. However, calling it a “fractal style” whoop is not an accurate description. Therefore, for reasons of clarity, I will refer to this build as the Nux65. This project is a variant of a theme. I am not trying to copy Fractal Engineering designs, however, my design choices were highly inspired by them. It is my attempt at making something of my own, while at the same time paying homage to Fractal Engineering's creative design choices.

For detailed information, including a list of all required materials, check [my build guide](https://nuxnik.com/nux65-tiny-whoop-build-guide) for this project. I have also created a build video you can follow along with: https://youtu.be/oRy05iRUu3I

Nux65 Tiny Whoop

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6096725.

A friend of mine bought this nerf target at a flea market for 4€. The only problem was that one of the arms which hold the targets was broken. Maybe someone else will find this model useful and keep this toy from being thrown into a landfill.  

Dream Cubby Shooting Digital Target Arm

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4886860.

For this project we will be making a simple DIY 2 series battery pack with a built in voltage indicator. We are going to 3d print the required parts and solder the rest of the components together. We will also be designing our own goggle battery enclosure and learning about battery packs in general. Sure, you can buy a battery pack online - but that's no fun. Nothing beats building your own stuff.

I have written a detailed article about this project on my blog: https://nuxnik.com/diy-fpv-goggle-battery-pack/

Files for this project can be found on the following pages:

[Github Porject Page](https://github.com/nuxnik/goggle-battery-pack)

The following files are provided in "branded" (nuxnik) und "un-branded" versions. I have also created a video detailing the build process:

https://youtu.be/54mMZEPDANs




18650 FPV Goggle Battery Pack 

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5137898.

# Synopsis

The Anker Soundcore Space NC headphones are pretty good. I have had them for a few years. However, the plastic connectors to from the headset to the ear phones are thin and flimsy. Mine broke after a year or so. Since the headphones worked great and there was nothing wrong with the electronics, I designed replacement earpiece holders. 

# Disassembly / Reassembly

Disassembly of the headphones takes a bit of patience, however I found the best method is to open one headphone enclosure, de-solder the wire that is connected to the PCB and disassemble the headset as you pull out the wire. Reassembly is the same process, just backwards. 

# Conclusion

I am more than happy with the 3D printed replacements. The functionality is not impeded and the headphones still fold as before. I hope this helps some headphones from being prematurely thrown into a landfill.

Anker Soundcore Space NC Headphones

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4792154.

 This is a camera mount for the Insta360 Go action camera on the Eachine Tyro79 frame. The camera tilt is 25°. This model was made using [solvespace](https://solvespace.com/index.pl), a free and fun to use CAD application.

The original file can be downloaded and abused [HERE](https://github.com/nuxnik/tyro79)

Tyro79 Insta360 Go Camera Mount

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4871771.

This is a small collection of mounts for the #NanoLongRange DIY drone project. The mounts include:

1. Insta360 Go (version 1) 
2. Beitian BN-180 GPS module
3. Combined Insta360 Go and Beitian BN-180 GPS module

You can view my flight video using a 3D printed #NanoLongRange drone, GPS module and Insta360 Go camera:

https://www.youtube.com/watch?v=W7uvuoRph2E

I have also written a short article about this mount:

https://nuxnik.com/nanolongrange-insta360-go/


#NanoLongRange / Rekon 3 Insta360 Go mount 

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4792292.

This is a camera mount for the Runcam 5 Orange action camera on the Eachine Tyro79 frame. The camera tilt is ca. 25°. This model was made using [solvespace](https://solvespace.com/index.pl), a free and fun to use CAD application.

The original file can be downloaded and abused [HERE](https://github.com/nuxnik/tyro79)

Tyro79 Runcam / Session 5 Camera Mount

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4700483.

A cheap small drone calls for a cheap small camera. This is a camera mount for the SQ12 action camera on the DIY Eachine Tyro79 frame. The camera tilt is ca. 30°. This model was made using [solvespace](https://solvespace.com/index.pl), a free and fun to use CAD application.

The original file can be downloaded and abused [HERE](https://github.com/nuxnik/tyro79-sq12-mount)

Tyro79 SQ12 Camera Mount

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4687888.

This is a simple action cam mount for a cheap xiaomi mijia 4k action cam. It was designed for the geprc mark4 frame. The camera tilt is 30°

Geprc Mark4 Xiaomi Mijia 4k Mount

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4868866.

This is a simple Insta360 Go camera mount for the DarwinFPV Darwin79 quadcopter.  It can be mounted by the two M2 screws of the frame.

Darwin79 Insta360 Go Camera Mount

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

nuxnik

Achievements

Seedling