Faces:

- "cross with blood drops": critical success
- "cross": success
- "blank": fail
- "stake": critical fail (or normal fail on non-blood die except for some advanced rules because thanks White Wolf for selling dice that don't work with the *Player's Guide*)

the die is slightly "thinner" than a standard VTM die with slightly filleted edges, 25mm tip-to-tip and a 35deg tip angle.

the "supported" variant (tested, prints well on my Creality HD002H with elegoo abslike) uses "designed support fins" which seem to prevent edge warping way better on geometric shapes like this than your usual slicer supports would.

"Vampire: The Masquerade" custom die

d10_fangcross_25mm_35deg.stl

d10_fangcross_25mm_35deg_supported.stl

can be used specifically for VTM / other World Of Darkness games, but also as a generic D10:
- Filled Pentagram is "critical success"
- "Corner-only" Pentagram is "success"
- (nothing is "failure")
- "Center-only" Penta*gon* is "bestial fail" (either ignore or fill in for non-Hunger dice)
- additionally contains the digits 0-9, if you need a flat surface (eg for open-top casting) i suggest to leave the 0 blank.

caveat: 
this last feature means the digits and "vtm results" do not align as suggested by White Wolf (which specify "a D10 roll >= 6 is a success, a 10 is a crit, a 1 is bestial"). the faces are still the same as on a vampire hunger die and a d10, but "rotated" in between those "modes". this has no practical impact *unless* you insist on the strict use of "success" and "6 or above" interchangeably. *this problem also exists on official vtm5 dice*, with for example 3 and 7 being success and fail respectively (assuming 1 to be the skull)

the die is a 20mm tall, 45degree "tip angle" pentagonal trapezohedron with *crisp* edges, the symbols are inset by 0.5mm.

"Vampire: The Masquerade" compatible 10-sided die

d10.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

nonchip

Pinned models

"Vampire: The Masquerade" compatible 10-sided die

"Vampire: The Masquerade" custom die

"Vampire: The Masquerade" custom die

"Vampire: The Masquerade" compatible 10-sided die