LaserTree Atomstack or Befon bracket
32 downloads · 4 years ago · If you have a diode laser engraver from Befon/Atomstack, specifically the A5/A5 Pro, and you want to
If you have a diode laser engraver from Befon/Atomstack, specifically the A5/A5 Pro, and you want to upgrade to the 10W LaserTree module, you will need this bracket. This is a direct copy of the Befon/AtomStack bracket, adjusted to fit the mounting holes on the LaserTree "80W with professional Air Assist" module. I may make some more adjustments to account for the bolts, but this will be MUCH more secure than LaserTree's solution of "Use one bolt".
Additional hardware: 4x M3x10mm panhead bolts 4x M3 flat washers 4x M3 locking washers
LaserTree Atomstack or Befon bracket
32 downloads · 4 years ago in  andÂ
4x4 MU Bracket - Bolt-Locked Inserts
2x2 MU Bracket - Bolt-Locked Inserts
6x6 MU Bracket - Bolt-Locked Inserts
2 CU - Bolt-Locked Shelf Support Bracket
Wall Mounted Controller Holder - Print in Place Folding Bracket
8x8 MU Bracket - Bolt-Locked Inserts
Bracket-Fix Point Joint
3x3 MU Bracket - Bolt-Locked Inserts
Snips Bracket for Multiboard
3x2 MU - Low Profile Bolt-Locked Bracket
5x3 MU - Low Profile Bolt-Locked Bracket
3 CU - Bolt-Locked Shelf Support Bracket
8x8 Multiboard Tile Bracket
The Rail v2
4x4 Multiboard Tile Bracket
2x2 MU - Simple Bolt-Locked Shelf
5x5 MU Bracket - Bolt-Locked Inserts
7x7 Multiboard Tile Bracket
Type 1, Big Thread Holes, 2x2 Inside Bracket
