Hot and Cold tap/ fossette tops for a very popular standard tap style made much more stylish and useful for the vision impaired and just to look better

Tap/Fossette top covers

cold tap topA.stl

Crystal ball stand with pentagram base and 5 cone pots for holding potions/small crystals/elements to aid third eyesight,
made for a 123mm diameter sphere but can easily be scaled up or down to required size,
no support needed 

Pagan crystal ball stand2.stl

https://youtu.be/dkDrYdBrhK4
A nice tight fit to standard M8, not too tight, best prints come if you turn down the heat in slice a bit, 100% infill, NO support and print horizontally if you can. 

M8 thread tested.stl

Got it right at last, an M8 INTERNAL thread TAP for use in cutting out a thread where ever you want in a part you're modeling, 
you may have difficulties converting to solid as there is a lot of geometry in the helix but don't worry I am making a video showing the easiest way I can find to make it on 

https://www.youtube.com/channel/UCpy2LPYeFDK8X-l0XhmKA4A

LIKE, COMMENT, SUBSCRIBE ;o)

M8 internal thread.stl

If your a vocalist who needs another mic stand for your instrument, or you want to mic up your drums with normal mics, 
this does a good job, 
adjustable telescopic mic stand boom

I have a video of this on youtube, please take a look & Like/Comment/Subscribe.

https://www.youtube.com/channel/UCpy2LPYeFDK8X-l0XhmKA4A 

mic stand extra boom and mic holder.stl

If your a vocalist who needs another mic stand for your instrument, or you want to mic up your drums with normal mics, 
this does a good job, 
adjustable telescopic mic stand boom

video on youtube search thingies Drum mic conversion kit ( wild thing-the troggs) 

convert your 20mm mic stand to hold 2 extra telescopic booms for double bass / mid toms , anything really, 
saves having two mic stands, prints well in fact i made a video: https://youtu.be/sX3xz9z9vIA

I have a channel on youtube, please take a look & Like/Comment/Subscribe.

https://www.youtube.com/channel/UCpy2LPYeFDK8X-l0XhmKA4A

Mid Tom mic stand conversion.stl

convert your 20mm mic stand to hold 2 extra telescopic booms for double bass / mid toms , anything really, 
saves having two mic stands, prints well in fact i made a video: https://youtu.be/sX3xz9z9vIA

make use of a spare snare stand by turning it into two mic stands with this conversion,
try to keep the layers as long as possible by printing them at an angle on the threads and don't use supports on internal threads, you will still need to run a tap and die through the threads... carefully.

I have a video of this on youtube, please take a look & Like/Comment/Subscribe.

https://www.youtube.com/channel/UCpy2LPYeFDK8X-l0XhmKA4A

snare to broom stick mic mount adapt.stl

make use of a spare snare stand by turning it into two mic stands with this conversion,
try to keep the layers as long as possible by printing them at an angle on the threads and don't use supports on internal threads

mic holder, 22mm cylinder mount and snare stand adapter or any 22mm cylinder/broomstick

I have a video of this on youtube, please take a look & Like/Comment/Subscribe.

https://www.youtube.com/channel/UCpy2LPYeFDK8X-l0XhmKA4A

mic mount for a 22mm cylinder/ broomstick.stl

mic holder, 25mm pipe mount and snare stand adapter

snare stand mic stand adapter top.stl

25mm pipe mount with M8 wing bolt and snare stand adapter,
I have a video of this on youtube, please take a look & Like/Comment/Subscribe.

https://www.youtube.com/channel/UCpy2LPYeFDK8X-l0XhmKA4A

snare stand mic stand adapter.stl

M8 threaded wing nut and threaded bolt with 8mm square hold for snare stand.
MUST FINE PRINT on the longest angle across the thread with 100% infill and remove all support on the female thread.
it will waist more PLA on the raft and support than the part uses so may as well get a steel one from amazon, it will get to you quicker than you can print it and you still have to run a tap & die over it VERY carefully.

I have a video of this on youtube, please take a look & Like/Comment/Subscribe.

https://www.youtube.com/channel/UCpy2LPYeFDK8X-l0XhmKA4A

M8 wing nut.stl

mic holder that fits to a standard mic stand

I have a video of this on youtube, please take a look & Like/Comment/Subscribe.

https://www.youtube.com/channel/UCpy2LPYeFDK8X-l0XhmKA4A

bass drum mic bracket.stl

mic holder that fits to a standard mic stand

STL file for 3D printing a replacement Hercules guitar stand adjuster as the original fails very commonly, and NO Hercules do not supply a replacement part.

I have a video of me fitting this on youtube, please feel free to like/comment/subscribe

https://www.youtube.com/channel/UCpy2LPYeFDK8X-l0XhmKA4A

HERCULES Guitar stand adguster replacement.stl

STL file for 3D printing a replacement Hercules guitar stand adjuster as the original fails very commonly, and NO Hercules do not supply a replacement part   

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

moonmonkey72

Achievements

Seedling

Debutant