Dream Snatcher dice tower is not for the faint of heart. This tower snatches dreams and clutches hope in its teeth. With deadly secrets around ever corner any adventurer will be on there toes. This tower also makes a great centerpiece when not in use. It has a couple of fun features like a double exit for dice, so pour them in. Also a storage with lock for that special surprise. Designed for FDM printers. The model without snout can be printed with supports turned off if you're daring. I use 8% infill with 3 walls. If you are using cura to slice this model, it didn't lay anything in the infill of the base to print on. To make up for the lack of support in the base, it needs an infill of 20% or higher. I recommend using a support block in that area with a infill density modifier, so the rest of the model can be a lower infill percentage. This is under license CC BY-NC - Attribution - Non commercial.