| Visit [JERRARI3D.com](https://www.jerrari3d.com/) for Instructions and a complete look at the GEN2 collection
__________________________________________________

The GEN2 Modular Storage system is a fully functional 3D printable organization ecosystem that was originally designed to be used under any table or desk. The GEN2 Table Top Kit V2 allows you to place these units elegantly on any surface. This version support GEN2 drawers in STANDARD length, you can find all the supported drawers here: [Jerrari3d.com](https://www.jerrari3d.com/gen2-modular-system/standard)

This refined version creates outstanding structure for connect neighboring storage units allowing drawers to be installed horizontally without limits. Thanks to the use of compliant mechanism and dovetail rails very few screws are even required to assemble the unit.

Quickly disassemble and reassemble the kit at any time to fit perfectly in any location.

___________________________

**185 Collection**

The 185 Collection offers decent storage volume while also maintaining compatibility with the widest range of 3D printers. Find all compatible 185 collection models here [HERE](https://www.jerrari3d.com/gen2-modular-system/standard)

__________________________________

**HARDWARE**

🔧[**Listed in instruction manuals**](https://www.jerrari3d.com/gen2-modular-system/instructions)

**INSTRUCTIONS**

🔧https://www.jerrari3d.com/gen2-modular-system/instructions/table-top-kit




GEN2 Table Top Kit V2 - 185

Cover - Upper - Double - STANDARD.stl

GEN2 QuickLocks V1.stl

TPU Feet X4.stl

Magnet Insert - 6x2mm.stl

Magnet Insert - 10x2mm.stl

185-1W-1H Case.stl

185-1W-1H Classic Drawer.stl

185-1W-1H Decor Drawer.stl

**LPE25-LPE40 Adapter**
**2.5" to 4" Exhaust Adapter**

If you're running a 4" exhaust line but your printer outputs a 2.5" hose, this is the missing link. The LPE25-LPE40 Adapter connects directly to the LogicalPlanet Quick Connect Exhaust System on the small end and steps up to a standard 4" duct on the large end — no hacks, no tape, no compromises.

The 2.5" end is fully compatible with the Quick Release Head (LPE25-H00), so you get the same tool-free snap connect and disconnect as the rest of the system.

**Parts**
- LPE25-LPE40 — 2.5" to 4" Adapter Body
- LPE25-E11 — End Ring (1x required)

**Dimensions**
- Overall height: 118.9mm
- Large end outer diameter: 100mm
- Small end outer diameter: 63.4mm
- Wall thickness: 1.6mm

**Compatible With**
- Full LogicalPlanet Quick Connect Exhaust System (LPE25 series)
- Quick Release Head (LPE25-H00)
- Variable Flow Valve (see link below)

---

**Print Settings**

- **Recommended material:** PETG or PLA
- **Nozzle:** 0.4mm
- **Layer height:** 0.2mm
- **Line width:** 0.4mm
- **Wall count:** 4 (1.6mm)
- **Top/Bottom layers:** 5
- **Infill:** 40% Cubic
- **Ironing:** Not required
- **Brim:** No
- **Support:** No

---

**Related Components**

**Quick Connect Exhaust System (full LPE25 series)**
[https://www.logicalplanet.com/2024/02/11/quick-connect-exhaust/](https://www.logicalplanet.com/2024/02/11/quick-connect-exhaust/)

**Variable Flow Valve**
[https://www.logicalplanet.com/2024/03/05/variable_flow_valve/](https://www.logicalplanet.com/2024/03/05/variable_flow_valve/)

---

**Commercial Licensing**
Commercial licensing is available through LogicalPlanet Memberships here on Thangs. Members can request customization and commercial support.

---

**Related Links**

**Join the LogicalPlanet Discord**
[https://linktr.ee/logicalplanet](https://linktr.ee/logicalplanet)

**Visit my blog for more details and other designs**
[https://www.logicalplanet.com/](https://www.logicalplanet.com/)

**Revisions and Updates**
I occasionally update and revise my designs. When I do, I'll document the changes here. Check back periodically for the latest revision notes or if you're experiencing any issues with a model. Please email me at logicalplanet3d@gmail.com if you would like me to make a revision or have comments about this design.

2.5 inch to 4 inch Exhaust Adapter

LPE25-LPE40, Adapter.stl

[Instructions](https://prinnit.com/ForgeCore/design/36AFLMXEabElHYuq1BMIKDJHH3L?tab=instructions&highlight=instructions)
[Hardware](https://prinnit.com/ForgeCore/design/36AFLMXEabElHYuq1BMIKDJHH3L?section=hardware&highlight=hardware)
[Filaments](https://prinnit.com/ForgeCore/design/36AFLMXEabElHYuq1BMIKDJHH3L?section=filaments&highlight=filaments)

**Magnetivy** - _Intermediate_
Ivy is a climbing plant, and now it can climb up your fridge! My Fridge is always a mess with a bunch of different ugly magnets, I wanted something that looked great, but could also organize all the stuff on my fridge. This Ivy was a great solution.

You can take the leaves off the stem to use as a single magnet, or slide things underneath the stem to hold items as well! 

**Prints-in-Place**
The stems of the ivy print in place! Thanks to some specially designed hinges. Each stem section has multiple joints allowing you to wind it back and forth on your fridge. All you have to do is add magnets.

**Customizability**
The stems all snap together, so you can easily make your Ivy as long as you want. There are also Y branches so you can branch off your vine in multiple directions, just like the real thing!


Want to Print the Morning Glory Version? [Click Here](https://than.gs/m/1306545)

Magnetivy - English Ivy Fridge Magnet with Articulating Stems - Print in Place Hinges

Stem.stl

Lady Bug Magnet.stl

These Mini Bag Lanterns were inspired by paper bag lanterns or luminaries. They print flat and then are folded into shape.  I designed them to be used with standard size tea lights:) These could also be used as little gift bags filled with candy, gift cards, etc.

The following STL files are included: 
Frank Bag
Ghost Bag #1 (double-sided)
Ghost Bag #2 (one-sided, cut-out face)
Jack Bag #1 (double-sided)
Jack Bag #2 (one-sided, cut-out face)

Dimensions of Mini Bag Lanterns 3.25in. X 2.5in.x 2in.

3D PRINTING SETTINGS
Layer Height 0.2mm
PLA works great
15% Infill 
No supports, no brim

To make these multi-colored without a multi-color printer do the following:
For the Frank Bag: start with green filament and insert a pause print at layer height 1mm to change the filament to black
Ghost Bag #1 (double-sided): start with white and insert a pause print at layer height 1.0mm to change the filament to black
Jack Bag #1 (double-sided): start with yellow and insert a pause print at layer 0.6mm to change the filament to orange 

I have also attached a 3mf file with the following print profiles:
Print plate #1: Frank Bag (two colors, green and black)
Print plate #2: Ghost Bag #1 (two colors, white and black)
Print plate #3: Ghost Bag #2 (one color, white)
Print plate #4:  Jack Bag #1 (two colors, orange and yellow)
Print plate #5: Jack Bag #2 (one color, orange)

See photo for how to fold bags. 

Have fun printing 💛

Mini Paper Bag Halloween Laterns (5 Styles)

Frank Bag_1.stl

**HELLO**
I present to you the 007 articulated dragon in its keychain version, ideal for carrying in your backpack. When you download it you will have three files. Two STL files, one with a hole and one without a hole, and one 3mf with a hole for multi-color printing.

**Advantages**
• This dragon design is adjusted and scaled for printing on the
most printers on the market.
• Ideal for those starting out in the world of 3D printing.
• This design requires no supports and is fully articulated.

If you liked this design and are excited to print it, you can post your MAKE in the comments

Remember that to sell physical 3D printing it is necessary to obtain a commercial license, more information in the membership button

**COPYRIGHT**
All TORUA3D designs are protected by copyright.
The purchase of this 3D model and its physical print is for personal use only.

TORUA3D designs and files may not be used for any commercial use; it is for personal use only. The 3D model or any part of the model in digital or physical format may not be shared, transmitted, redistributed, remixed, modified, duplicated or sold.
**(Do not commercialize)**


Articulated Dragon Keychain 007 - Print in place - No supports - 3mf - STL 

DRAGON KEYCHAIN 007 - WITH RING.stl

The Skull of Fate, a mysterious dice tower, gazed ominously upon the gaming table. Carved from a single, ancient skull, its empty sockets seemed to absorb the light around it. Players trembled as they dropped their dice into the hollowed tree surrounding it, awaiting the verdict of the gods. With a faint rattle, the dice tumbled through the skull's hollow cranium, clattering onto the table below, revealing destinies forged by chance and fate. Those who rolled well, whispered thanks to the Skull, while losers feared its curse, as if the very spirits of the departed judged their fortune.

This model is in three pieces so that you can have different colors without having a multicolor printer. 
The solid model design is included as well. 

Printing recommendations: 
.10 to .20 layer height  
Base with rocks - Prints Support Free
The tree and skull need support, organic tree supports work best. For the skull make sure the supports are going into the dice tunnel. 

For the design that is one solid piece - Auto tree supports and uncheck the supports on the base plate only if checked the supports do not appear properly and the skull tunnel may not print nicely. 


Allow prints to cool before taking them off of the printer bed.

Important Please Read: 
All Rebel Alicorn Designs are protected under Copyright Law.
With your purchase, you are given the right to download and print the design for your personal use only. You do NOT have permission to resell, remix, or redistribute the digital files in any way. No alterations to the designs are permitted. Prints of the designs cannot be sold without permission. To sell the PRINTS of Rebel Alicorn Designs, you must obtain authorization by joining the “Legacy Merchant Tier or Merchant Tier” on either Patreon or Thangs.

More designs are coming soon! Check out my socials and give a follow to keep up to date.

Warning:
 NOT suitable for unsupervised play by children or pets. Small parts can become a choking hazard if broken off due to rough play and broken 3D printed parts can create sharp edges. NOT recommended for children under 3.

Skull Dice Tower

DiceTower-Tree-RebelAlicornDesigns.stl

An adorable Grim Reaper figurine with a knitted texture covering its entire body and scythe, resembling soft, hand-knitted yarn. 

The head of the grim reaper is hollow, allowing you to place a small LED candle inside and glowing through the hood. 

It's super easy to print as it needs no supports at all, and the scythe can be printed in colors on any 3d printer, just add a pause right after the blade, then switch to brown.

**"All of my models are for personal use only, unless you are an active subscriber of Thangs with a commercial license."**

➡️ https://linktr.ee/ik3d

3D PRINTING SETTINGS:

-No supports needed!

-Use a brim, 2 walls for the reaper and 3 walls for the scythe. 0.16mm Layer height and 5% rectilinear infill. 

-Includes 3MF Factory Files for Bambu / Orca Slicers.

Knitted Grim Reaper Figurine / Candle Holder

Grim Reaper.stl

## 🎨 **Printing & Painting Guide for This Model**  
For **detailed printing settings, painting tips, & extra resources**, visit:  
👉 [**Full Instructions & Printing Guide Here**](https://serev3d.com/go?source=thangs&content=031_Cute%20Medusa%20-%20Candle%20%26%20Soap%20Holder&placement=printing-guide&to=https%3A%2F%2Fwww.patreon.com%2Fposts%2Fcute-medusa-soap-114138382)  

---  

## 🚀 **Get Exclusive 3D Models & Benefits with SEREV3D!**  

Looking for **high-quality, ready-to-print STL & 3MF files**? Join **SEREV3D** and get:  
✅ **Dozens of original premium designs** with **print settings included**
✅ **Multi-version models** to fit different printing needs
✅ **Painting & post-processing recommendations** for stunning results
✅ **Exclusive community perks & personal design requests!**

[🔹 **Join SEREV3D on Patreon & unlock everything!**](https://serev3d.com/go?source=thangs&content=031_Cute%20Medusa%20-%20Candle%20%26%20Soap%20Holder&placement=join-patreon&to=https%3A%2F%2Fwww.patreon.com%2FSEREV3d)  

---  

## 🛍️ **SELL YOUR 3D PRINTS – KEEP 100% OF PROFITS!**  
💰 **Turn your 3D printer into a business!** As a **paid All-Access Member - Merchant Tier**, you get:  
✅ **Permission to sell physical prints** of our designs on **Etsy, Amazon, Facebook, eBay, your store & conventions**
✅ **No royalties or restrictions** – Keep **100% of your sales!**
✅ **Authorized Seller Badge** for credibility & trust
✅ **Your store featured** on our **"Authorized Sellers" page** to attract buyers  

[🛍️ **Get your Seller Badge & start selling!**](https://serev3d.com/go?source=thangs&content=031_Cute%20Medusa%20-%20Candle%20%26%20Soap%20Holder&placement=auth_seller&to=https%3A%2F%2Fwww.patreon.com%2Fcheckout%2FSEREV3d%3Frid%3D23799323)  

🔗 **More info on commercial licensing & discounts:** [SEREV3D Website](https://serev3d.com/go?source=thangs&content=031_Cute%20Medusa%20-%20Candle%20%26%20Soap%20Holder&placement=more_info&to=https%3A%2F%2Fserev3d.com%2F)  

---  

## 🔥 **More Amazing Designs Released Every 2-3 Days!**  
🚀 Stay ahead with fresh new models **every few days!**  

✅ **Get instant access to our newest releases & premium STL files**
✅ **Unlock all past & future designs with a Patreon membership**
✅ **Sell your prints with commercial rights – Join the Authorized Sellers List!**

[🔹 **Join SEREV3D Now & Start Printing!**](https://serev3d.com/go?source=thangs&content=031_Cute%20Medusa%20-%20Candle%20%26%20Soap%20Holder&placement=join_patreon_bottom&to=https%3A%2F%2Fwww.patreon.com%2FSEREV3d)  

[![](https://serev3d.com/assets/serev3d-banner-square.jpg)](https://serev3d.com/go?source=thangs&content=031_Cute%20Medusa%20-%20Candle%20%26%20Soap%20Holder&placement=banner_image&to=https%3A%2F%2Fwww.patreon.com%2FSEREV3d)  


---

## 🎛️ **Recommended Print Settings**  
*(If you use **Bambu or Orca Slicer**, all the print settings are automatically loaded in each version’s 3MF files!)*  

🔹 **Layer Height:** 0.2
🔹 **Wall Loops:** 2
🔹 **Infill:** 10% - Style: gyroid
🔹 **Supports:** Type: tree(auto), Top Z Distance: 0.28


Cute Medusa - Candle & Soap Holder - 3D Print STL/3MF

Cute Medusa-Candle Holder-SEREV3d.stl

Cute Medusa-Candle Holder-HOLLOW eyes-SEREV3d.stl

This 'Part B' Snap can attach to 'Part A' Snaps to create a [Double Sided Snap](https://thangs.com/search/%22MB8%22%20creator%3A%22Keep%20Making%22?scope=thangs&view=grid). It creates a flush surface on the Tiles and only has a small thread hole in the middle.

Learn more about this part at https://multiboard.io/knowledge-hub

**Printing Guidelines:**

Use 3 perimeter wall thickness, 0.2 mm layer height, 15% infill, and no supports. Apart from that, use your printer's default settings.

The printing orientation is as provided in the file. Make sure the downloaded files are .STL. This part has been designed with a tolerance of 0.25 mm. Your printer will need to be able to bridge gaps of up to 30 mm for some designs.

For more information about printer settings, [click here](https://multiboard.io/knowledge-hub/printing-guidelines).

---

This object is part of Multiboard, a FREE and ridiculously modular organization system with thousands of parts, for creating the most adaptable workspace possible. Learn more and find ALL the parts at https://multiboard.io


Faceless Snap (DS Part B)

Faceless Snap Screw on (DS Part B) - Loose.stl

Faceless Snap Screw on (DS Part B) - Permanent.stl

Faceless Snap Screw on (DS Part B) - Standard.stl

Faceless Snap Screw on (DS Part B) - Tight.stl

This experimental dish can appear both very solid or almost ethereal depending on the viewing angle. There are some steep overhangs but a well tuned printer and good filament makes it work!

Print solid with a 0.4mm nozzle to ensure that each wall is exactly 2 shells.

---

Photographed model was printed on the [Bambu Lab X1-Carbon 3D Printer](https://bit.ly/MA_X1C) using [Bambu Lab PLA Silk Dual Color (Neon City)](https://www.awin1.com/cread.php?awinmid=46345&awinaffid=2034925&ued=https%3A%2F%2Fus.store.bambulab.com%2Fproducts%2Fpla-silk-multi-color%3Fid%3D41629533372552).*
*_These affiliate links give me a commission on sales at no additional cost to you. Thanks for supporting Make Anything!_

CORRUGA Square Dish

corrugaDish.stl

The Multiboard Tiles form the base of Multiboard, allowing you to screw in Threads, insert Snaps and use the Pegboard holes. 

The Tiles have two types of holes: Multiholes and Pegboard Holes.

The Multiholes (big holes) are 25 mm apart and allow you to insert “Snap” pieces, in a similar way to the “Honeycomb Storage Wall'' system. The Multihole is also a threaded hole, allowing you to screw in Big Thread Bolts.

The Pegboard Holes (small holes) are 25 mm apart and allow you to use hundreds of pegboard accessories with the tiles. The Pegboard Holes are also threaded, allowing you to screw in Small Thread Bolts.

Tiles are also symmetrical on both sides.

This is a “Core” Tile, so it has two sides with pegboard holes, and forms most of your Multiboard.

Learn more about this part at https://multiboard.io/knowledge-hub

**Printing Guidelines:**

The printing orientation is as provided in the file. The print has been designed to be “3 wall perimeters” in wall thickness. Printed at a layout height of 0.2 mm. It doesn't need printing supports. Use the default 15% infill. This part has been designed with a tolerance of 0.25 mm. Your printer will need to be able to bridge gaps of up to 30 mm for some designs. 

—

This object is part of Multiboard, a FREE "all in one" organization system with 700+ parts, that combines pegboard holes, honeycomb snaps, Gridfinity like bins, threads, brakes, and much more.

Explore and build the coolest, most adaptable workshop at https://multiboard.io

8x8 MU - Center Grid Interfitted - MultiBoard Octagon Plate

8x8 Multiboard Core Tile.stl

Give your doors a positive spin with this 3D-printed thumbs up doorknob! Designed to work perfectly with Amazon Basics doorknobs, the thumb offers a fun, friendly way to greet anyone who enters. Whether you want to add some cheer to your home or office, this unique piece is sure to catch attention. Get the 3D printing files today and craft your own thumbs up doorknob!

Thumbs Up Door Knob!

ThumbsUp_P1S.3mf

Meet the Slime Monster, the adorable little slimy friend you never knew you needed!

This mischievous monster looks like **it’s floating in mid-air**, ready to hold all your daily essentials in its belly. Perfect for candies, keys, wallets, or even your cards—this playful design brings spooky vibes with a side of cuteness to your desk or shelf.

The Slime Monster features a separate jaw piece that easily snaps into place, letting you adjust it for an extra fun, chomping effect. **No supports needed here**—just print, assemble, and you’re ready to go! At 1:1 scale, this model fits most standard 3D printers, but feel free to scale it up or down for a larger or mini monster friend.
(120% for the Bambu Lab X1C, P1P, P1S, etc...)

Ready to embrace the #Halloween spirit? This Slime Monster is fun to print and even more fun to display! Grab yours and add a playful touch to your space this season.

**Printing Settings**:

Nozzle: 0.4 mm
Layer Height: 0.2 mm
Infill Type: Cubic or Hatch
Infill Percentage: 15% or 8%
Walls: 2
Get creative with colors and bring your Slime Monster to life!

Slime Monster

Slime_Monster-by_Holoprops.stl

Transform your Google Nest Mini 2 into a spooky centerpiece with this bat wing holder! 🕸️👻 Securely holds your Nest Mini and easily mounts on the wall, adding a dash of gothic charm to any space. 🖤 Perfect for Halloween or to keep the spooky vibes year-round! 🎃 Simple to install and a fang-tastic way to showcase your smart home tech! ✨

Bat Wing Google Nest Mini 2 Holder

NEST_BACK_V2.stl

Spooky Controller Stand – **_Free Download_**

Get ready to embrace the haunted season with the Spooky Controller Stand, **a fun and easy-to-print** model perfect for gamers who want to get into the #Halloween spirit! Whether you're a _PlayStation_, _Xbox_, or _Switch Pro_ controller user, this stand is designed to hold your controllers securely while adding a spooky vibe to your gaming setup.

**Printing Details**
This model is incredibly simple to print and requires no supports. It comes in one piece, but if you’re looking to customize it with multiple colors, you can use your slicer’s Fill Object mode to print a multicolor version, such as a different color for the screen.

**PLA Used in Photos**
Black and Red Silk: Eryone Black and Red Silk PLA
Skulls: eSun Bone White PLA+
White Matte: Hatchbox White Matte PLA
Pink Silk: Bambu Lab Pink Silk PLA

**Recommended Print Settings**
Layer Height: 0.2 mm
Nozzle: 0.4 mm
Infill: 15% cubic or 8% hatch
Walls: 2

These settings will give you the same results as in the photos. The stand works perfectly with controllers such as the PS5, PS4, Switch Pro, Xbox, Xbox Series X, and many more.

I hope this model adds a touch of spooky fun to your setup. Have a great Spooky Season, everyone!

**Important**: This model is for **personal use only**, unless you are a member of the **Merchant tier** on Thangs. In that case, a commercial license is also available for this model.

Thank you all for your support

Spooky Controller Stand

Spooky_Controller_Stand_by_Holoprops.stl

I have now made a version 2.0 of this product, which is significantly better.  I recommend that product over this one.  The new one is available here...  [https://than.gs/m/1386318](https://than.gs/m/1386318)

========================
Now with a pick-up knob for easier use.  See the STL filenames to choose the type of your choice.

Pull this drain strainer out of your sink and hold it over the waste bin, squeeze the sides, and it pops open to drop out any trapped food scraps.  Push it back together and drop it back into the drain.  Touch-free disposal of your food scraps from the strainer.

I have designed this product in 2 heights to accommodate various sink drain heights.  The lower profile design is approximately 22mm high and the other is approximately 30mm high.

This design is resistant to hot water that humans can cope with but of course, do not pour boiling water directly onto it.  Use PETG and print with 100% infill.

100% printed - no hardware, fasteners, or adhesives required.  No support required

Thank you pilbomags70 for the inspiration for this design!

How I print it:
Material = I recommend PETG.

Nozzle = 0.4mm
Layer height = 0.2mm
Line width = 0.4mm
Wall count = 4 (1.6mm)
Infill = 100%
Brim =  Do not use brim (everywhere) as it could close up the gap between the outer and inner parts.
Ironing = ON, to help produce a smooth finish that food scraps are less likely to stick to.

**Related Links**

The Drainer Version 2.0 is available here…
[https://than.gs/m/1386318](https://than.gs/m/1386318)

Visit my blog for more details and other designs:
https://www.logicalplanet.com/

**Revisions and Updates**
I occasionally update and revise my designs. When I do, I’ll document the changes here. Check back periodically for the latest revision notes or if you’re experiencing any issues with a model.






Pop-Open Drain Strainer #throwback edition

Sink Drain Strainer 1v00e H22.stl

Utile

Activity related to collaborating with others on models

Likes, comments, and activity from your community

New content from your premium memberships

Emails and messages from designers you follow

Get notified when someone purchases your models or memberships

menoudfab

Achievements

Voyager