This design was made with you in mind :)
This Mac Mini Under-the-desk mount minimizes desk clutter and conveniently position your computer near cable management solutions. The model was design to be fully 3D printable WITHOUT ANY SUPPORTS! The Mac Mini does need to be inserted into the mount prior to securing to the table using any standard wood screws. The Mac Mini was intentionally designed to be locked inside to prevent it from accidentally falling out! The computer pictured is the Mac Mini M2, but the mount should be compatible with the other Mac Mini’s as the size has not changed. The mount offers plenty of ventilation pockets and slots to provide emphasis on the Mac Mini thermals. Also, all the ports to the Mac are accessible via the back open section of the mount.
Become a member and download the .stl and the preconfigured .3mf Bambu Studio File by selecting “Download All > Original”
Model Assembly Pretty simple for this one — print the model without supports, insert your computer without any cables attached, and screw the mount to the bottom-side of your desk!
Materials Bambu Lab PETG Basic (Blue Grey) — Mac Mini Desktop Computer
Print settings Material — PETG Print orientation — shown in images Nozzle size: 0.4 mm Layer Height: 0.28 mm Infill: 15% Bed Size: Minimum 256x256mm