This design was made with you in mind :)

This rattan guitar hook is a stylish way to display & store your guitar. The model was design to be fully 3D printable WITHOUT ANY SUPPORTS! The rattan “fabric” should be printed first (x1), then the main frame will automatically pause at the perfect time to drop in the rattan sections and seal them in! Watching patterns like this one print layer by layer is definitely a sight to see!
Become a member and download the .stl and the preconfigured .3mf Bambu Studio File by selecting “Download All > Original”

Note: If you are interested in a commercial license to sell prints of my designs, you must obtain the license by signing up for my Entrepreneur membership tier!
Model Assembly Pretty simple for this one — print the rattan section first vertically, then print the framing (print will pause at point to drop in rattan sections) and resume after stoppage, zip in 2 drywall screws into a stud, and load your guitar!

Watch the associated reel showing the assembly on my instagram page @mcinventiveproductions

Materials Bambu Lab Matte PLA (Matte Bone White) — https://us.store.bambulab.com/ Bambu Lab Matte PLA (Matte Latte Brown) — https://us.store.bambulab.com/
Print settings Material — PLA Print orientation — shown in images! Nozzle size: 0.4 mm Layer Height: 0.2 mm Standard (Adaptive Layer Height) Infill: 80% Bed Size: Minimum 150x150mm
P.S. The links in this description may be affiliate links which allow me to benefit financially from your purchase at no extra cost to you!