tracking pixel
MC Inventive Productions

CheckeredPictureFrames

by
mcinventiveproductions
Follow
Follow
Remix Model
2D
3D
Makes
CheckeredPictureFrames 3d model
CheckeredPictureFrames 3d model
CheckeredPictureFrames 3d model
CheckeredPictureFrames 3d model
CheckeredPictureFrames 3d model
CheckeredPictureFrames 3d model
CheckeredPictureFrames 3d model
CheckeredPictureFrames 3d model

This design was made with you in mind :)

These checkered picture frames are some of my favorite designs! They print with minimal supports and use magnets to uniquely secure the pictures in place. The model was printed on my Bambu Lab P1S using the AMS. Check out the material and print details below!
Become a member to get the STL files and configured .3mf Bambu Studio File by selecting “Download All > Original” Note: If you are interested in a commercial license to sell prints of my designs, you must obtain the license by signing up for my Entrepreneur membership tier!

Model Assembly Pretty simple for this one — print all 3 built plates using an AMS with your two favorite colors, press 6x3mm magnets into the 8 slots (might need a touch of super glue), and then assemble the frame with your favorite photos!

Watch the associated reel showing the assembly on my instagram page @mcinventiveproductions

Materials Bambu Lab PLA Matte (Ivory White) — https://us.store.bambulab.com/ Bambu Lab Matte PLA (Latte Brown) — https://us.store.bambulab.com/ 3x6mm magnets — https://amzn.to/3zVhvwj Gorilla Super Glue : https://amzn.to/3YJHT6m

Print settings Material — PLA Print orientation — as shown in slicer images on this post! Nozzle size: 0.4 mm Layer Height: 0.16 mm Bed Size of my Printer: 256x256mm
P.S. The links above may be affiliate links which allow me to benefit financially from your purchase at no extra cost to you!


2 Likes2 DownloadsNovember 8, 2024


2 Likes2 DownloadsNovember 8, 2024