This design was made with you in mind :)
These 3D printable arch fridge magnets have 2 different configurations for this download. There is a mono-tone rainbow arch magnet, and a checkered arch magnet.
Become a member to get the STL files and configured .3mf Bambu Studio File by selecting “Download All > Original”
Note: If you are interested in a commercial license to sell prints of my designs, you must obtain the license by signing up for my Entrepreneur membership tier! DISTRIBUTION OF FILES OR PRINTS IS STRICTLY PROHIBITED WITHOUT THE ENTREPRENEUR MEMBERSHIP!
Model Assembly Pretty simple for this one — print the models as shown by the .3mf image, press-fit the 3x6mm magnets, and use them on your fridge, locker, etc!
Watch the associated reel showing the assembly on my instagram page @mcinventiveproductions
Materials Polymaker PLA Pro (Black) — https://amzn.to/3X680Du Polymaker Matte PLA (Beige) — https://amzn.to/3yHIkDL eSun PLA (Light Khaki) : https://amzn.to/4dnIVJN Bambu Lab PLA Matte (Ivory White) — https://us.store.bambulab.com/ Bambu Lab PLA Matte (Charcoal) — https://us.store.bambulab.com/ Bambu Lab Matte PLA (Latte Brown) — https://us.store.bambulab.com/
Print settings
Material — PLA
Print orientation — shown in .3mf image
Nozzle size: 0.4 mm
Layer Height: 0.12 mm
Infill: 15%
Bed Size of my Printer: 256x256mm
P.S. The links above may be affiliate links which allow me to benefit financially from your purchase at no extra cost to you!