tracking pixel
Kyoot F

Heckler and Koch MP5 K-PDW BB Magazine SpeedLoader V3

by

kyootfox

Follow
Follow
Remix Model
Like
Heckler and Koch MP5 K-PDW BB Magazine SpeedLoader V3 3d model
2D
3D
Makes
Be the first to upload a make
This model is restricted by licensing terms. 
1 Likes8 DownloadsFebruary 23, 2022
This model is restricted by licensing terms. 


Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4664854.

Version 3 of the H&K MP5 Magazine loading little .177 Cal (4.5mm) BB's sucks, even with the good magazines that Umarex provides with the H&K MP5 K-PDW. This is a speed-loader for the magazines to drop those 40 little balls into the magazine.

Print at 100% in the orientation provided 3-ish Hrs on Ender 3 High Quality, PLA, clean out the support and ream out the BB hole to ensure easy BB passage and no plastic in your magazine.

Pull Magazine Follower back until locks, place on top of magazine, should be snug. This holds the retaining latch back so the BBs should just fall into the magazine. Lightly shake if you get a BB Jam at the hole. I may make one that has a 40 BB Measure/larger hopper, but as is this cuts loading time down to about 10-20 seconds.

Designed in TinkerCad. You can Tinker it yourself https://www.tinkercad.com/things/63p5vOr6GbR

<iframe width="560" height="350" src="https://www.tinkercad.com/embed/63p5vOr6GbR?editbtn=1" frameborder="0" marginwidth="0" marginheight="0" scrolling="no"></iframe>

1 Likes8 DownloadsFebruary 23, 2022




This model is restricted by licensing terms. 
1 Likes8 DownloadsFebruary 23, 2022
This model is restricted by licensing terms.