**A simple spray can holder for the Ikea Lack table**

If you have your 3D printer mounted on an Ikea Lack table, this support mounted on the table leg will allow you to always have the hairspray can at hand...

The holder accepts spray cans up to 58mm in diameter.

More info : https://sites.google.com/view/pirpolo/home-page/3d-printed-stuff-for-3d-printer/spray-can-holder

....And if you like my projects and want to help me develop new ones you can always [buy me a coffee](https://www.buymeacoffee.com/ktf4517y).... 

**To build the support you will need the following materials:**
- 4x self-tapping screws
- 5x 6x2 mm round magnets

**Print tips :**
- Print with this orientation (see image in the gallery)
- Filament - any you want
- Nozzle: 0.4
- Layer: 0.2
- perimeter: At least 4 walls
- Supports: no
- top/bottom: 5 layers
- Infill : 10~15%
- Finally glue the 5 magnets in the niches on the "TOP.STL" model


Spraycan Holder for Ikea Lack

base.stl

These risers allow the entire Creality Ender3 V2 printer to be raised by approximately 18mm, allowing better air circulation underneath the printer, thus increasing the quality of cooling.
The system is compatible with both standard cooling and custom covers for larger fans.
Two STL models are supplied, one designed to be fixed with screws and one free to be moved. 

**PRINt TIPS :**
- Filament - any you want
- Print with this orientation (both models)
- Nozzle: 0.4
- Layer: 0.2
- perimeter: At least 4 walls
- Supports: yes
- top/bottom: 5 layers
- Infill : 10~15%

More info here : https://sites.google.com/view/pirpolo/home-page/ender3-v2-mod/ender3-v2-riser

....And if you like my projects and want to help me develop new ones you can always [buy me a coffee](https://www.buymeacoffee.com/ktf4517y)....

Ender3 V2 Riser

riser_mod_A.stl

The display stand is based on this project by 3Deddy on [Thingiverse](https://www.thingiverse.com/thing:4221768).

Instructions e materials needed :

You need :
1x DIN 912 M6x30 screw 
1x M6 nut
3x self taping screw

Download the 3Deddy project and print only the following files:
1x : Front_V1.stl
1x : Stand_off_top_right_V1.stl
1x : Stand_off_top_left_V1.stl
2x : Stand_off_bottom_LR_V1.stl

Print Tips:  
Nozzle: 0.4
Layer: 0.2
perimeter: At least 3 walls
Supports: no
top/bottom: 5 layers
Infill : 10~15%

You need to modify the head of the M6 screw by removing about a millimeter from one side in order to make the head from round to a D-shaped profile. This can be done simply by using sandpaper.

More info here : https://sites.google.com/view/pirpolo/home-page/smuff-related-projects/btt-tft35-e3-housing

Any feedback is welcome

....And if you like my projects and want to help me develop new ones you can always [buy me a cofee](https://www.buymeacoffee.com/ktf4517y)....






BTT TFT35 E3 Top Hanging Housing

display_cover.stl

A 15 degree angled stand for the original Creality Ender3 V2 printer display

More info : https://sites.google.com/view/pirpolo/home-page/ender3-v2-mod/ender3-v2-display-stand

Nozzle: 0.4
Layer: 0.2
perimeter: At least 4 walls
Supports: yes
top/bottom: 5 layers


Any feedback is welcome

....And if you like my projects and want to help me develop new ones you can always [buy me a cofee](https://www.buymeacoffee.com/ktf4517y)....


Display_stand.stl

supporto_display.stl

An alternative whiper for the SMuFF project

More info here : https://sites.google.com/view/pirpolo/home-page/smuff-related-projects/wiper-bin

any feedback is welcome

....And if you like my projects and want to help me develop new ones you can always [buy me a cofee](https://www.buymeacoffee.com/ktf4517y)....


SMuFF Whiper

Base_A1_ver0.99.stl

assembly.stp

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

ktf4517

Achievements

Seedling

Explorer

Spraycan Holder for Ikea Lack

Ender3 V2 Riser

BTT TFT35 E3 Top Hanging Housing

Display_stand.stl

SMuFF Whiper