tracking pixel
John J

Decorative picture frame A3

by
kisolre
Follow
Follow
Remix Model
kisolre
kisolre
|
Image 1 of 13
Decorative picture frame A3 3d model
kisolre
kisolre
|
Image 1 of 13
Decorative picture frame A3 3d model
2D
3D
Makes
Decorative picture frame A3 3d model
Decorative picture frame A3 3d model
Decorative picture frame A3 3d model
Decorative picture frame A3 3d model
Decorative picture frame A3 3d model
Decorative picture frame A3 3d model
Decorative picture frame A3 3d model
Decorative picture frame A3 3d model
Decorative picture frame A3 3d model
Decorative picture frame A3 3d model
Decorative picture frame A3 3d model
Decorative picture frame A3 3d model
Decorative picture frame A3 3d model
This model is restricted by licensing terms. 

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3203393.

This is a decorative picture frame. I wanted to hang that papyrus on the wall but paying 30 money was more than it costs. So I bought a simple 5 money frame without a border and designed and printed this decorative one. It is held with some Super-tack or double sided tape on to the glass. I designed this to be printed in several pieces so they could be adjusted for different size frames. Also since it doesn't need to be strong I made it printable in vase mode. Parts were glued with two component glue using the glass as a guide and then painted with acrylic paint. For my A3 (420x297) frame I used 4xPiece1, 4xPiece1 mirrored, 2xPiece3 and 0.7mm extrusion width.

You should use the included FreeCad source to adjust for your specific size.

The thing is posted mainly as an example/idea how to make easy big decorative frame: -design the frame -cut in pieces -print vertically in vase mode -glue pieces together -paint -attach to the glass frame with super-tack/double-sided tape

Any comments, suggestions,... are welcome. Please post your makes :)


0 Likes6 DownloadsMarch 8, 2023


0 Likes6 DownloadsMarch 8, 2023
This model is restricted by licensing terms.