#DIY
#flashforge
#thangs3d
Cheap magnets is always weak and a pain to clean when it gathered some dust.(I also loose it a lot due to it falling always)
This is a planning board magnet with magnets imbedded inside the 3d printed part itself. It offers easier handling of the magnets for your everyday school works. And because the magnet is embedded it is easier to clean the base of the print.
Pause the print at layer 11 and insert the 6mmx4mmx1.5mm neodymium magnet inside then resume print. (Can be done trough the slicer software). The fit is adjust do that the magnet won't rattle inside but sits nicely and easy to place. 

Planning Board Magnets.stl

#DIY
#flashforge
#thangs3d

This is a planning board magnet with magnets imbedded inside the 3d printed part itself. It offers easier handling of the magnets for your everyday school works. 
Pause the print at layer 11 and insert the 6mmx4mmx1.5mm neodymium magnet inside then resume print. (Can be done trough the slicer software) 

#DIY 3d printed soldering iron tip holder (t12 tips). I made this soldering iron as a cheap, easy to hold and use soldering iron. It can even fit inside as pencil case and be powered via a lipo battery. I used pla with some silicone tube for thermal isolation.

Pentype_SolderingIron.asm

Handle.par

T12-K.par

#DIY this is the handle to be 3d printed in pla or other 3d printing plastics. 3d printed soldering iron tip holder (t12 tips). I made this soldering iron as a cheap, easy to hold and use soldering iron. It can even fit inside a pencil case and be powered via a lipo battery. I used pla with some silicone tube for thermal isolation.
 This can be useful for upcoming school projects
Assembly in https://thangs.com/kc3002/Pentype_SolderingIronasm-24749

#flashforge
#thangs3d

Pentype_SolderingIron_Handle.stl

#DIY this is the handle to be 3d printed in pla or other 3d printing plastics

43T_Nitrorc_Spurgear.stl

I made this 3x183mm belt designed to be printed in tpu, you can adjust the height accordingly

belt-61t.stl

This is openrc Model made by barspin link:https://www.thingiverse.com/thing:83024

 OpenRC 1:10 4WD Touring Concept RC Car by barspin

Ball Joint <3124>

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

kc3002

Achievements

Seedling

Debutant