tracking pixel
Juan R

Homer can cup - Workspace Design Challenge

by
juankmed
Follow
Follow
Remix Model
juankmed
juankmed
|
Image 5 of 6
Homer can cup - Workspace Design Challenge 3d model
juankmed
juankmed
|
Image 5 of 6
Homer can cup - Workspace Design Challenge 3d model
2D
3D
Makes
Homer can cup - Workspace Design Challenge 3d model
Homer can cup - Workspace Design Challenge 3d model
Homer can cup - Workspace Design Challenge 3d model
Homer can cup - Workspace Design Challenge 3d model
Homer can cup - Workspace Design Challenge 3d model
Homer can cup - Workspace Design Challenge 3d model
This model is restricted by licensing terms. 

Homer can cup entry to the Thangs Workspace Design Challenge, i took the Original file Blank Can Cup - 12oz by MandicReally from Blank Can Cup - Workspace Challenge Base!!

Changes made: The original model had no space between the outer and inner wall and when printing it would fill with the printing material, therefore, increase the outer diameter and leave a space between walls, leaving a layer of air to reduce heat transfer between the environment and the can, this decision was made since the thermal conductivity of the air is much lower than that of a polymer or the printing material, this will aim to keep the can cold longer, at the same time I closed the bottom hole for the same purpose. I decided to make the exterior in the shape of Homer Simpson's face because I consider it to be a fun icon of beer.


18 Likes79 DownloadsFebruary 21, 2023


18 Likes79 DownloadsFebruary 21, 2023
This model is restricted by licensing terms.