With a funky and modern design, this lamp is sure to add a touch of whimsy and sophistication to any room. Designed in two parts, you can easily twist to remove the shade to change the bulb. To protect your surfaces and add extra grip, the base includes 3 pads.

👋 **Important Notes**:
1. The lamp shade STL file is solid and requires printing with “spiral vase” enabled to remove infill. See the included PDF instructions for more details.

💎 **Features**: 
1. Designed in two parts, you can easily twist to remove the shade to install the light fixture or change the bulb.
2. Two variants for popular pendant light fixtures: threaded and smooth-walled fixtures.
3. The lamp shade is designed to print with a single wall using “spiral vase” mode.
4. The base optionally includes 3 TPU feet to protect your surfaces.
5. Includes 3MF + STL files and print instructions with photos.
6. Easy to slice using PrusaSlicer, OrcaSlicer, or Bambu Studio.
7. **Requires a minimum bed size of 180mm x180mm x150mm**.

💡 **Recommendations**:
1. I recommend using PrusaSlicer, OrcaSlicer, or Bambu Studio.
2. Scaling the parts is not recommended due to the required tolerances to secure the shade, base, and light fixture.
3. I recommend using a 0.6mm nozzle to strengthen the shade, but a 0.4mm nozzle also works.

🔨 **Hardware**:
1. 1x Pendant light fixture – 2 popular variants supported
    1. Threaded fixtures with 40mm outer diameter, such as [Pendant Light Cord Lamp Kit - Amazon.com](https://www.amazon.com/gp/product/B07ZW13PJX) 
    2. Smooth-walled fixtures with a 37mm outer diameter, such as [JACKYLED 12ft pendant light - Amazon](https://www.amazon.com/dp/B016MDPWL0?ref=ppx_yo2ov_dt_b_product_details&th=1)
2. 1x E26/E27 LED light bulb. Low-wattage (5 - 9-watt) LED bulbs are recommended as traditional bulbs get too hot.

📖  **Instructions**:
1. **Shade**
    1. Print using spiral vase mode with 4 bottom layers. Confirm your slicer updated related settings to the following:
        1. Spiral Vase: enabled (the name may vary based on the software)
        2. Top Layers: 0
        3. Bottom Layers: 4
        4. Infill: 0%
        5. Perimeters: 1
2. **Base Variant 1: Threaded Fixture**
    1. Print without supports using your preferred settings. My preferred settings:
        1. Perimeters: 3
        2. Top Solid Layers: 5
        3. Infill Fill Density: 10%
        4. Infill Fill Pattern: Gyroid
    2. There are 2 variants, with and without a negative cavity for the feet
3. **Base Variant 2: Smooth-Walled Fixture**
    1. Use the same settings as the Threaded Fixture
    2. Requires a threaded collar to tighten the base around the fixture. **A secure fit requires a tight tolerance**. I prefer to print it separately from the base using the same slicer settings.
    3. Insert the smooth-walled fixture so that it extends 2 - 5mm (1/8 - 1/4in) above the base (as shown in the photos)
    4. Thread on the collar until tight. The collar is tight if the fixture remains secure when screwing in the light bulb.
4. **TPU feet, Optional**
    1. Print in TPU to protect your surfaces and add grip.
    2. To insert the feet into the base, align the foot, then press the base and foot against a tabletop.

** These files are for personal use only and not to be resold

Dollop Lamp

Dollop Lamp Base - smooth fixture v2.3.2.3mf

Dollop Lamp Base - threaded fixture v2.0.1.3mf

Dollop Lamp Shade v1.2.1.3mf

Small round TPU foot v1.1.3mf

Dollop Lamp PREVIEW.stl

With its delicate texture and wavy silhouette, the Burst Lamp resembles soft woven fabric, creating a gentle and captivating glow that will enhance any contemporary space.

The Burst Lamp is thoughtfully designed to utilize common parts for easy repairs, upgrades, or reuse to minimize waste. Thank you for supporting sustainable design!

Important:
• This is an advanced model that requires a specific layer height to achieve the desired appearance. We included two variants, ideal for either 0.4mm or 0.6mm nozzles.
    • The first layer height must be 0.2mm
    • The layer height must be 0.2mm or 0.32mm 

Dimensions:
• Width: 150mm (6in)
• Depth: 150mm (6in)
• Height: 237mm 9.3in)

Included:
• 3MF + STL files with two variants for the most popular pendant light fixtures: threaded and smooth-walled fixtures.
• Print and use instructions PDF with photos
    • The shade uses spiral vase mode
    • The base prints without supports
    • Optional TPU feet

Recommended Parts:
• 9-watt E26/E27 LED Bulbs. LED bulbs are recommended as traditional bulbs get too hot.
• Variant 1: Threaded pendant light E26/E27 fixture (40mm OD).
• Variant 2: Smooth-walled pendant light E26/E27 fixture (37mm OD).
• PLA or PETG filament for the shade and base.
• Optionally, TPU filament for the feet.

Care:
• Avoid exposure to excessive heat.
• To change the bulb, twist the shade counter-clockwise from the base and pull up. The shade fits snuggly, but you shouldn’t feel significant resistance.

** These files are for personal use only. Selling the digital files or prints is not permitted.

Burst Lamp

Burst Lamp Shade - 0.32mm layer height v2.4.3mf

Small round TPU foot v1.0.3mf

Burst Lamp Base - smooth fixture v2.2.1.3mf

Burst Lamp Base - threaded fixture v2.0.1.3mf

Burst Lamp Shade - 0.2mm layer height v2.4.3mf

Burst Lamp PREVIEW.stl

Jonmaymakes only sells original works by Jon May. Trained as an artist, living in Brooklyn NY, each piece is thoughtfully designed for its appeal, quality, ease of use, and environmental sustainability.

Elevate your space with our unique lamps and dapper planters. Each piece is meticulously designed to bring a touch of modern elegance to your home. Browse our collection and discover the perfect statement pieces for your living space.

This store is committed to sustainability, utilizing common parts for easy repairability or disassembly for other uses. 

We hope you enjoy our journey.

Visit our Etsy store for more makes: https://jonmaymakes.etsy.com

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

jonmaymakes

Achievements

Seedling