Just a Headset Holder for the Yamaha P-515.
Don't know if it will fit other models.

It uses the screws from the original stand - L-515, so should fit any model with this stand.

Just use 2 m3 threaded inserts and screw the two parts together.

Yamaha P-515 Headset Mount

Base_Mount.stl

https://youtu.be/vFJ8ptbHbo0

If you know the Can-Am Ryker and you are from the EU, you also know that it has these ugly blinkers at the back.
As far as I know, at least in germany, they are not really necessary in the way they are.
I wanted to get rid of them and replace them with better looking ones.

I got mine from Louis a Germany Motorcycle Shop, the link will be below.
They have a 10mm threading.
On one site there isn't enough space to fit a normal washer, thats why I have the special one included.

The Last Picture is just because it looks nice and as you can see, it still has the ugly blinker there :)

Link: https://www.louis.de/artikel/cob-led-blinker-schwarz-m10-x-1-25/10035507?filter_article_number=10035507

Can-Am Ryker Blinker Mounts - m10

Ryker Blinker Mount - Left.stl

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4855144.

A mount to secure those cheap round humidity sensors in a spool for storage.
I designed the mount so I can mount the sensors in the spool and put them in a vacuum bag.

The generic one fits those black standard spools that, for example, anycubic ships.
The other one is specifically designed to fit spools from extrudr, but could also fit other brands like the Eryone TPU spool on the pictures.
WARNING, because of these small holes, the extrudr one is more difficult to print.

I also put the fusion360 file in here, so you can customize the size if you need to.

Everything you need SHOULD be parametric, but no guarantees.

Hygrometer Spool Mount

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4308916.

A cable organizer / guide to run cables around the edges of a table.
Created this to hide the cables comming from the top underneath the table.
Not the most elegant solution, but working for me.

Please feel free to download the fusion360 file and modify the parameters to fit your needs!

The STLs are made to fit my table (28.5mm) and 5 cables with a maximum size of 8mm/cable.


Cable Organizer for table edge

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4270552.

Parametric cableholder.
Just glue base in place and slide the holder over it.
I use it with 3m VHB 19mm tape.

I would recommend to print the holder in the orientation of the bigger one in the picture.

Parametric slide on cable holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4292068.

Just a case to glue in an internal USB splitter. :)

Internal USB Splitter Case

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4405345.

Designed this to store my filament spools.
It's honestly a waste of filament, but I wanted to get rid of the silver filament so not a problem for me. :)

Just print as many as you need and place them next to each other.
Print it without support.

Spool Storage Holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4275699.

Part to mount the antenna of the ASUS PCE-AX58BT card.
I would recomment printing in the orientation of the Cura screenshot.
I did not start the part with the right orientation unfortunately. :)

Currently designed to fit a width of 17.50mm.
The mount works with 3 one euro cent coins, as the Antenna has 3 magnets and I did not have anything I could use other than that.

You can download and change the coin size to fit different coins / things.

The holes and cutouts are for using cable ties.

ASUS PCE-AX58BT Antenna mount

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

jan.boerschlein97