Quick design for a bracket to hold the Creality supplied blue snips on a Multiboard from Keep Making, Zack Freedman.  Requires a push-fit bolt or snap.

Printed with .2 layer height, 15% infill, 3 top/bottom layers, 3 perimeters/walls.  If tight change horizontal expansion to -.02.

Snips Bracket for Multiboard

Multiboard Snips Bracket.stl

Its a pencil holder I use for pens, markers and remotes.
With dividers, also keeps your pens standing at attention. 

MultiBoard Pen_, Pencil, Marker

MultiBoard-Pen_Holder.stl

The Multitool is an all-in-one tool that allows you to screw in different types of threads. You can use it to…

- Screw “screw-in fasteners” into snaps.

- Screw “Multigrid T bolts” into the bottom of Multigrid Bins.

- Screw “Multigrid T bolts” into the side of Vertical Multigrid Bins, by connecting the Multitool pieces at a 90-degree angle.

- Tighten flat-head bolts by using the small Multool piece (only works with medium and big thread bolts).

- Tighten any “Flat Push-Fit Head, Bolt” by inserting the Multitool into the push-fit hole.

The two Multitool pieces click together for nice storage.

Learn more about this part at https://multiboard.io/knowledge-hub

**Printing Guidelines:**

The printing orientation is as provided in the file. The print has been designed to be “3 wall perimeters” in wall thickness. Printed at a layout height of 0.2 mm. It doesn't need printing supports. Use the default 15% infill. This part has been designed with a tolerance of 0.25 mm. Your printer will need to be able to bridge gaps of up to 30 mm for some designs. 

—

This object is part of Multiboard, a FREE "all in one" organization system with 700+ parts, that combines pegboard holes, honeycomb snaps, Gridfinity like bins, threads, brakes, and much more.

Explore and build the coolest, most adaptable workshop at https://multiboard.io

Multitool

Multitool.stl

Push-fit Multiboard Accessory for holding E3d Volcano style nozzles.  Includes labels for different sizes.

Multiboard Nozzle Holder - Volcano Style

Multiboard Nozzle Volcano V2.stl

Super lube multi-purpose synthetic grease holder for multiboard. You will need two 
9 mm Small Thread, Flat Head, T-Bolt: 

[https://thangs.com/designer/Keep%20Making/3d-model/9%20mm%20Small%20Thread%2C%20Flat%20Head%2C%20T-Bolt-973894](https://thangs.com/designer/Keep%20Making/3d-model/9%20mm%20Small%20Thread%2C%20Flat%20Head%2C%20T-Bolt-973894)

Multiboard Grease Bottle Holder 

Grease holder multiboard v1.STL

Mitreapel CA 100 glue holder for multiboard. 

You will need two 9 mm Small Thread, Flat Head, T-Bolt to screw into pegboard holes:

[https://thangs.com/designer/Keep%20Making/3d-model/9%20mm%20Small%20Thread%2C%20Flat%20Head%2C%20T-Bolt-973894](https://thangs.com/designer/Keep%20Making/3d-model/9%20mm%20Small%20Thread%2C%20Flat%20Head%2C%20T-Bolt-973894)



Multiboard CA Glue Bottle Holder

CA 100 Glue Bottle Holder v2.3MF

The Multiboard Glue stick dispenser is designed to hold multiple purple glue sticks. Great for those who buy the multi-pack. 

Print the model upright. Does not require supports.
Print 3 walls at 0.2mm layer height.

Requires 2 "9 mm Small Thread, Plain Head, T-Bolt" to mount to your Multiboard which may be obtained from "Keep Making" on Thangs.

Multiboard Glue Stick Dispenser

Multiboard Glue Stick Dispenser.stl

Multiboard/multiconnect clip to match the mounting spot on my Klein multimeter. 

August 2024 - added an angled version - my wall is to the left of my desk, so now my meter is hanging where I can see it without taking it off the board. 

If you like this, you can [buy me a coffee](https://ko-fi.com/lindahlengineering)

Klein multimeter Multiboard mount

Klein meter holder.stl

Klein meter holder (angled).stl

A simple component/parts box holder for your Multiboard.

You also need 2 multiboard large bolts to screw it into a multihole.

In the pictures i used 13mm bolts with a push-fit head. 9mm would probably work as well.

There are two versions:

    Default shelf which has the same side-shelf dimensions as the original
    Large shelf which has slightly bigger side-shelves to support smaller boxes better

There is also a variant available with reinforced side walls.

Pictured is the default version, but in hindsight I probably should've gone with the large version.

Printed in white PLA+, 0.2mm layer height, 15% infill, 3 walls.

This is a remix of:
https://makerworld.com/en/models/419611


Component/small parts box holder for Multiboard 

multiboard-box-holder-default-shelf.stl

**!!UPDATED VERSION!!**
I have made a simple but important update to the Multiboard Bolt Driver:  The depth of the socket has doubled so there is less slipping when driving bolts.  note:  Ignore V2 as that was an error in uploading the model with my 4D brand.  V3 is the updated, brandless version.

**Updated slicer settings**
I confirmed that although printing this horizontally is the correct orientation for toughness, it requires a substantial support which ruins the texture of one side of the driver and results in a rough edge.  Additionally, if you do not add supports to the socket, it will sag and will therefore be unusable - ask me how I know.

Standard 0.2mm except:
4 Wall Line Count - Increases sturdiness
10% Infill - results in a lighter weight driver
10mm Brim - Not required but I was more comfortable printing vertically with a brim

This is a remix of "Screw Driver" by megatron321

( https://www.thingiverse.com/thing:709811 )

This screw driver has been adapted to drive MULTIBOARD bolts and T-Bolts.  After installing and removing so many multiboard bolts, my fingers hurt terribly so I created a tool to easily install and remove the bolts.  It is designed to fit both plain and flat bolts as well as plain and flat t-bolts.

I added grooves along the head to indicate the sides of the bolts to assist with lining them up with the multiboard tiles.  There are two smaller grooves that indicate the top/bottom points of the t-bolts.

I added a custom brand to the handle base. The file does not have the brand.

It fits perfectly in a Multiboard Horizontal Pole Mount when attached to my Multiboard Multitool Holder.

Multiboard Bolt Driver

This is a remix of "Screw Driver" by megatron321

( https://www.thingiverse.com/thing:709811 )

0.2mm quality
No supports needed if printed vertically

This screw driver has been adapted to drive MULTIBOARD bolts and T-Bolts.  After installing and removing so many multiboard bolts, my fingers hurt terribly so I created a tool to easily install and remove the bolts.  It is designed to fit both plain and flat bolts as well as plain and flat t-bolts.

I added grooves along the head to indicate the sides of the bolts to assist with lining them up with the multiboard tiles.  There are two smaller grooves that indicate the top/bottom points of the t-bolts.

I added a custom brand to the handle base. The file does not have the brand.

I printed this standing up on the base and used a Brim to keep it in place. If you want to deal with more supports, you can print it in its side so the layer lines are perpendicular to the torque direction but I haven't had any structural issues.

MultiBoardDriver_v2.stl

Remixed from Multiboard Tape Roll Storage Rack by Daboo and 4x4 Push-Fit Bracket by Keep Making. Made to mount on the Multiboard system. Each bracket uses:
2 Weight Bearing Directional Snaps
2 9mm Small Thread, Flat Head, T-Bolts
2 small screws to hold the PVC pipe in place

Use 1/2" PVC pipe to create the shelves.

Multiboard 4x4 Push-Fit Tape Roll Bracket.stl

Looking for your tape measure again?

Having your tape measure on your Multiboard, you'll never spend time looking for your tape measure again.
Better yet, put a Multiboard up in every room with tape measures on each so one will always be within arms reach.

Print upright with no supports at 0.2mm layer height with three walls for optimal strength.
Requires 2 "9 mm Small Thread, Plain Head, T-Bolt" to mount to your Multiboard, which may be obtained from "Keep Making" on Thangs.

Multiboard Tape Measure Storage Clip

Multiboard Tape Measure Storage Clip.stl

**Pegboard Click T-Bolts**

An additional option for your Multiboard mounting needs 

Available in 5-10mm lengths in 1mm increments as well as 13mm, 20mm, and 30mm lengths

Great option for mounting bins (https://than.gs/m/999446), small shelves, multiboard tiles, etc.

the small threads and hook ends go into the multiboard small holes and will snap into place if oriented correctly 25mm apart (similar to the pegboard click)

**[Vertical Bin](https://than.gs/m/999446) Mounting**
This was made to be used for  these [bins and sleeves](https://than.gs/m/999446)
in order to mount these bins or other items without the multiboard threads, you'll need a small thread nut: [link](https://thangs.com/search/%22MB84%22%20creator%3A%22Keep%20Making%22?scope=thangs&view=list)

Pegboard Click T-Bolts for Multiboard

Small Thread Pegboard Click Adapter-5mm.stl

Small Thread Pegboard Click Adapter-6mm.stl

Small Thread Pegboard Click Adapter-7mm.stl

Small Thread Pegboard Click Adapter-8mm.stl

Small Thread Pegboard Click Adapter-9mm.stl

Small Thread Pegboard Click Adapter-10mm.stl

Small Thread Pegboard Click Adapter-13mm.stl

Small Thread Pegboard Click Adapter-20mm.stl

Small Thread Pegboard Click Adapter-30mm.stl

Multiboard Pegboard Clip. Holds not so thin paper, notes and other things.  For thinner paper take the other remixed clip by me.


Printed it with PLA matte, 0.2 layer height and solid / 100% infill. No supports needed. 

This is remixed from Skadis Pegboard Clip by @nslinger: https://www.printables.com/de/model/466163-ikea-skadis-clip
CC BY-NC-SA 4.0 DEED

Multiboard Pegboard Clip

Multiboard Pegboard Clip.stl

2x1 Multigrid Base Plate with push fit poles

2x1 Multigrid Base Plate pushifit.stl

Simple Multiboard Pushfit holder or Pliers or scissors. 

Multiboard Pushfit Pliers/Scissor Holder

Multiboard Pushfit Pliers holder.stl

Multiboard **MultiBoom Arm** - Boom Arm
BOOM! There it is! Another functional part for your Multiboard - a boom arm that can connect your phones, cameras, mic, or other multiboard accessories at multiple angles!

All arms can accept Multiboard Bolts, Snaps, Threads, Hooks, shelves etc.  Piece this thing together in hundreds of combinations. Cant wait to see what you can do with this!

Included Boom Parts
**Mounting to Multiboard:**
MultiBOOM_Mount-A_Wall_T-BOLT_STRONG.stl - Print w/Supports
MultiBOOM_Mount-A_Wall.stl - Optional Push Mount (not recommended)
9 mm Small Thread, Flat Head, T-Bolt.stl
MultiBOOM_Mount-B_Swivel.stl
MultiBOOM_Mount-C_Pin.stl

**Boom Arms:**
MultiBOOM_Arm_Female_80mm.stl
MultiBOOM_Arm_Female_100mm.stl
MultiBOOM_Arm_Female_150mm.stl
MultiBOOM_Arm_Male_100mm.stl
MultiBOOM_Arm_Male-Female_100mm.stl
MultiBOOM_Arm_Male-Female_150mm.stl

MultiBOOM_Nuts.stl - Used all over your Boom to attach Arms
MultiBOOM_Mount-A_InLine-Swivel.stl


MultiBoom Arm - Multiboard Boom Arm

MultiBOOM_Arm_Male_100mm.stl

MultiBOOM_Mount-C_Pin_Short.stl

MultiBoard **MAG-BOLTS**
Enhance your Multiboard with Mag-Bolts! Keep tools and accessories neat and tidy with this attractive mod! 

- 9 mm Big Thread, Flat Head, Bolt
- 9 mm Big Thread, Plain Head, Bolt
- 10 mm Mid Thread, Plain Head, Bolt

Simply add 6x3 magnets stacked for a super strong magnetic mounting spot.  Screw in Multiboard Bolt.  Get fancy and use RED filament!

Remixed Original Bolts in Multiboard [https://www.multiboard.io/parts-library/bolts](https://www.multiboard.io/parts-library/bolts)

**Inspired by the entire Multiboard**
(Your FREE “All-In-One” 3D Printed Storage System)
https://thangs.com/designer/Keep%20Making

MultiBoard MAG-BOLTS

MultiBoard_MagBOLT_BigThread_FlatHead.stl

MultiBoard_MagBOLT_BigThread_PlainHead.stl

MultiBoard_MagBOLT_BigThreadShort_FlatHead.stl

MultiBoard_MagBOLT_BigThreadShort_PlainHead.stl

MultiBoard_MagBOLT_MidThread_PlainHead.stl

MultiBoard_MagBOLT_MidThreadShort_PlainHead.stl

Push-Fit holder for flush cutters. Designed to fit chp-170, but will probably fit others just as well.

Multiboard Flush Cutters Holder

MB Flush Cutter V2.stl

Multiboard Utility Knife

utility-Body.stl

Hi all thanks for looking at my model. PolyDryer has a very nice box for keeping filament dry. But the mount created was with a standard screw hole for wall mounting. This didn't fit the needs for me since im using Multiboard. 
so i added a rail to the back so u can pick how u wanna mount it. 
here a link to the original model https://www.printables.com/model/865300-polydryer-wall-mount 

polydryer wall mount remix.3mf

Multiboard

Activity related to collaborating with others on models

Likes, comments, and activity from your community

New content from your premium memberships

Emails and messages from designers you follow

Get notified when someone purchases your models or memberships

gunkleneil

Achievements

Seedling

Debutant

Voyager

Novice Maker